Leviton RENOIR II AWRMG-I Series Installation

WARNINGS AND CAUTIONS:
TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!
TO BE INSTALLED AND/OR USED IN ACCORDANCE WITH ELECTRICAL CODES AND REGULATIONS.
IF YOU ARE NOT SURE ABOUT ANY PART OF THESE INSTRUCTIONS, CONSULT AN ELECTRICIAN.
DO NOT GANG VERTICALLY.
ONLY INSTALL FOR THE ALLOWED LOAD TYPES. INSTALLATION FOR ANY OTHER LOAD TYPE WILL VOID WARRANTY AND POSSIBLY CAUSE DAMAGE TO
THIS DEVICE AND/OR CONNECTED EQUIPMENT.
USE THIS DEVICE WITH COPPER OR COPPER CLAD WIRE ONLY.
INPUT - 120 VAC 60 HZ
Features and Operation:
Installation Requirements:
(See Figure 2).
Installation Instructions:
WARNING:
1. TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER AT
CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE
WIRING!
2.
3.
4.
5.
6.
7.
INCANDESCENT/MAGNETIC LOW VOLTAGE NO NEUTRAL DIMMING CONTROL
Cat. Nos. AWRMG-IXX, AWSMG-IXX & AWSMT-IXX
not
Multi-Gang Installations
(see Figure 3).
Installation is complete.
RENOIR II
INSTALLATION
Load
Disconnected
Hot (Black)
Neutral (White)
Hot (Black)
Neutral (White)
Figure 1.
Hot (Black)
Line
120VAC
60 Hz
Neutral (White)
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
Load
Load
Connected
Disconnected
Service Switch
Black Blue
Yellow
Green
Ground
– Run a separate neutral wire
for each load circuit
Black Blue
Yellow
Green
Ground
– Run a separate neutral wire
for each load circuit
Center tab in opening
Align flats when
installing knob
Wiring Diagram
Dimming Control
Blue
Yellow
For use in multi-way
control (remote)
applications.
Cap wire if not used.
Ground (Green)
Load
Connected
Service Switch
Load
White
Load
White
Black
LOAD
White