V-TAC GALLERY VT-7151 Instruction Manual

GALLERY - TABLE LAM P(VT-7151)
TECHNICAL DATA
SKU 3912/3913/3914
VT-7151
MODEL
MAX RATED WATTS 60W
E27(Bulb not included)
BASE
Glass+Metal
MATERIAL
1.5 METER
WIRE LENGTH
IP20
IP RATING
AC:220-240V,50Hz
INPUT VOLTAGE
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read
these instructions carefully before starting the installation and keep this manual handy for future
reference. If you have any another query, please contact our dealer or local vendor from whom
you have purchased the product. They are trained and ready to serve you at the best. The war­
ranty is valid for 5 years from the date of purchase. The warranty does not apply to damage
caused by incorrect installation or abnormal wear and tear. The company gives no warranty
against damage to any surface due to incorrect removal and installation of the product. The prod­
ucts are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void
the warranty. This product is warranted for manufacturing defects only.
WARNING!
1. Please turn off power and read this instruction before starting the installation.
2. Please turn power off before changing the bulb and cleaning the fixture.
3. Proper grounding should be ensured throughout the installation.
4. Installation should only be done by a certified electrician.
5. For Indoor Use only
This marking indicates that this
product should not be disposed of
with other household wastes.
WEEE Number: 80133970
ill.
Caution, risk of electric shock.
INSTALLATION DIAGRAM:
Step 1: Screw the bulb (not included) into the lamp holder.
Step 2: Connect the plug into the socket (make sure the power is OFF before connectiong
the plug into the socket)
Step 3: Turn ON the power and test the light.