Related Manuals for Telefunken S4400DM
Summary of Contents for Telefunken S4400DM
- Page 1 • • ’ • • • PALcolor S4400 DM/5400 DM/5400 DM F • •...
- Page 2 _ _ _ << > >> ZOOM SP/LP >> A - Z Z - A ZOOM -/-- SP/LP A - Z Z - A -/-- 2 x LR 06 1,5 V.
- Page 3 • Never use abrasive cleaners. • To clean the front and the cabinet of your equipment use a soft cloth dipped in mild detergent. The use of strong solvents such as white spirits or alcohol based products could damage your equipment.
- Page 4 - Select the programmes (from 1 to 99) Units connected - Calling up audiovisual programmes - - Enter the channels numbers - The 0 key is used to call AV inputs 1, 2 and 3. TELETEXT 25/27 Calling up Teletext - Options - Alarm - How to select -...
- Page 5 For further details, see page 22. ON THE FRONT AND AT THE RIGHT SIDE OF THE SET Connect to AC main supply 220-240 V~50 Hz S-Video and Volume adjustments Display audio sockets On/Standby light: Green : on...
- Page 6 This set is equiped with an automatic station search system which is used for : • Searching for all the stations received in your region and storing them in memory • Automatically searching for the name of the station •...
- Page 7 Scan through to check that the stations found are correctly numbered and named as you want than: • IF YES press briefly >> the menu disappears and is replaced by the picture of the programme selected. PR+, PR- Select the station +, -, 0..9 Move this programme •...
- Page 8 • Limit the maximum volume. • Limiter le volume sonore maximum. • Change the menu language (German, Spanish, French, English, Italian, Swedish, Dutch), • Modifier la langue des menus (allemand, espagnol, français, anglais, italien, suédois). • Permanently display the number of the programme being watched, •...
- Page 9 Teletext, you can IR download (-)No Yes(+) PR-- opt to select any one of the 4 channels - BBC1, BBC2, ITV, CH4. Teletext Fine Tuning Select the corresponding programme number. The IR download line has no effect on your TV set.
- Page 10 The PICTURE menu is displayed : Brightness PICTURE is selected. Colour Contrast Digital Mastering Light Sensor If this is not the case, select the Contents line using the green key and Picture with the key. PICTURE FORMAT Select the Brightness line (green key).
- Page 11 PIP (Picture in picture) for programmes inlays. You use this function to : inlay in one of the corners of the screen (P I P) : – images from the input connectors (AV1, AV2, AV3 or RGB), while viewing a channel ;...
- Page 12 Select an AV image on the screen. -/-- Repeatedly press the PR +/- button on the remote control to scroll through PIP displays of all stored programmes and the other AV programmes. Press a long time to remove the PIP.
- Page 13 Format 16/9 Subtitles Zoom The format can also be selected automatically when the source is one of the two Euro-AV sockets AV1 or AV2. In this case, select AUTO which is only displayed for sources AV1 and AV2. PICTURE FORMAT The format is stored in memory for AV1, AV2 and AV3.
- Page 14 AUTO/STEREO position enables you obtain MONO sound for mono broadcasts and STEREO for stereo broadcasts. * NICAM is a digital sound transmission system, it enables you to receive broadcasts in high quality STEREO or DUAL SOUND. Analogue MONO sound is transmitted simultaneously (MONO in NICAM STEREO or SOUND 3 in NICAM 3).
- Page 15 The following menu is displayed : LOUDSPEAKERS HEADPHONES HEADPHONES is selected. T E L E F U N K E N If this is not the case, select the Contents line with the red button and HEADPHONES with Headphones Select the Headphones line (red key).
- Page 16 SWITCHING ON / SELECTING PROGRAMMES Switch on the television set with the mains switch if the standby light is off. If the standby light is on, select the programme required by the PR 02 BBC 2 remote control or the PR-/+ buttons on the front of the set.
- Page 17 ZOOM 1 S/T -/-- ZOOM 1 S/T Stand-By Zoom S/T : image enlarged and moved up for easier reading of subtitles. STAND-BY Press briefly, the Stand-By light turns red to indicate that the set is now in standby. AUTOMATIC STOP The set is automatically switched to standby a few minutes after the station being watched stops broadcasting.
- Page 18 T E L E F U N K E N Sleep-timer (-/+) 2 : 1 5 Remove the menu from the screen. The set will switched to standby at the end of the timer interval. >> You can display the time left before the stop time.
- Page 19 - when the set is switched to standby and a sleep timer command is programmed ; - when the set is turn off at the mains and a sleep timer command is programmed ; - when a wake-up command is programmed.
- Page 20 Press the volume (+) key briefly. Change your PIN number - - - - The new code is stored in the memory and the menu displays : Access the programme list (+) When you enter a code for the first time, the figures replace T E L E F U N K E N the dashes ;...
- Page 21 If they are selected using the remote control number buttons, the following message is displayed on the screen : If you do not enter the right code, the message Incorrect PIN Incorrect PIN number number will appear above the first one.
- Page 22 If you have a satellite receiver, refer to the operating manual in order to find out the type of signal delivered then select VIDEO, S-VIDEO or RGB. You can also connect it to the decoder socket of the second VCR if the latter is fitted with one. VIA THE AUDIO/VIDEO/S-VIDEO SOCKETS (AV2) This is used to connect : •...
- Page 23 Continue to press : the letters are shown in reverse order. When the required character appears, go to next character. To leave a space look for the blank character (between ? and A). CALLING UP AUDIOVISUAL PROGRAMMES Press AV to call AV1, AV2 or AV3 programmes in sequence.
- Page 24 COPYING VIDEO TAPES It is necessary to have 2 VCRs with the same specifications : 2 VHS/8 mm or 2 S-VHS/Hi-8 mm. Connect the playback VCR to the Euro-AV1 socket in playback mode. Connect the recording VCR to the Euro-AV2 socket in recording mode.
- Page 25 If the teletext transmits an alarm page, you can make it come up at a set time. While entering the number of the alarm page (E. G. TVE : 697, ORF : 784). Then enter the digits to choose the time ( e.g., for 20.45, type 2, 0, 4, 5) and hold down the last digit until the teletext is removed.
- Page 26 >> TOPTEXT Select subpages with red or green keys. Green FASTEXT FAVORITE Allows you to store up to 6 of your favourite teletext pages. To store your favourite pages, select one of the 6 locations by GUIDE FAVORITE DISPLAY SUBCODE...
- Page 27 NEWS FLASH The latest news can be superimposed on the television picture. Look up the teletext index to find the page number and enter it. Once the page has been found, you can watch the normal television programme. When the lastest news page is updated it will be superimposed on the picture.
- Page 28 You may use this channel adjustment menu if you do not wish to restart auto programming (where there are only few channels in your area or if a new channel is transmitting). TUNING PROGRAMME PROGRAMME T E L E F U N K E N...
- Page 29 Briefly press 5 to display the tens : Briefly press 2 to display the units : 5 2 Optional : To be used if the picture is not clear or for searching for a specific source, for example, a video recorder channel Fine Tuning...
- Page 30 After changing code, it is not necessary to relock the programs which were already locked. Wij raden u aan deze sticker uit te knipper om te voorkomen dat een kind hem in handen krijgt ALS U UW PERSOONLIJKE CODENUMMER NIET MEER WEET Druk eerst op de gele toest om de regel Overzicht van het menu te selecteren, en dan op de (+) toest om VERGRENDELEN te selecteren.