Page 1
Thank you for purchasing the Falcon 4K Drone with Camera! Elevate your aerial adventures with the Falcon Small Drone with Camera. It’s a cutting-edge quadcopter that combines convenience and performance, for an unmatched flying experience. About This Item Cinematic Aerial Mastery The drone features a 120°...
Compact Portability The Falcon drone with camera comes with a travel case, making it easy to store and transport. The light, compact design comes with foldable drone propellers and fits neatly in the compact case.
Aerobatic Tricks Take your flying skills to the next level as the Falcon Drone showcases its aerobatic prowess. Perform impressive backflips and 360° flips, demonstrating the drone's agility and precision. Plus, enjoy stable flight, and the ability to hover in a fixed position, for picture-perfect captures.
The Perfect Gift The Falcon drone makes an awesome gift for people of all ages. While it has the sophistication to impress a drone pro, it’s easy enough for children 10+ to handle. What's in the Box? 1. Foldable Drone 2.
Getting Started In order to achieve the longest life for your drone, it’s important to understand how to set up each component in the system. The more time you take to prepare the equipment and learn the movements, the longer the aircraft will last.
Remote Control Remote Battery Installation BATTERIES ARE NOT INCLUDED Insert the AA batteries according to the electrode indicators in the back of the remote, in the battery tray (+/-).
Page 7
Mobile Phone Rack Pull out the mobile phone handle and clamp your phone to the rack. This will keep it stable while in use. Preparing the Drone for Flight Battery Installation The drone has a separate battery from the remote control. It’s a Lithium-Cobalt battery.
1. Remove the drone battery from the fuselage. 2. Connect the battery’s charging port to a power source, via the USB cable. 3. The red light indicates that the unit is charging. If there is no light, this indicates the battery is full.
Page 9
Turning the Drone On #1) As a safety precaution, make sure the drone is facing away from you. That way, if it crashes during takeoff, it does so in the opposite direction. #2) Press the power switch on the top of the drone to turn the aircraft on. #3) Turn the remote control on by pressing the power button on the center of the controller for two seconds.
Pairing Devices After you assemble the drone and all the parts are in place for the hardware, it’s time to set up the software. The first thing you must do is pair the remote to the aircraft. After powering on the remote and drone, go into the settings in your mobile phone, and connect the wi-fi to “Ky/HD/Du”.
As you push the top button, the drone will rise up, ready for flight. If you press the bottom button, it will land. The engine will then shut down, in 5-10 seconds. Headless Mode The Headless mode is more for beginners. You can consider this like a driver’s assistant. The aircraft will lose front, back, left, and right functions, solely flying in the direction of the drone’s nose (camera side).
Horizontal Calibration Horizontal calibration can be initiated if the drone cannot rise during vertical takeoff. This ensures the aircraft doesn’t veer hard left or right upon takeoff. Before takeoff, press the Horizontal Calibration button. It’s located on the upper, right-hand side of the remote, towards the antennae.
This can happen in two ways: 1. Drift all the way forward or backward. You can maneuver this by using the “Forward Fine-Tuning” and “Backward Fine-Tuning” buttons on the remote. These are located directly to the left of the power button. 2.
Page 14
During the flight, pressing the speed button changes the speed to the next level. Press it twice to change to the highest speed, Speed 3. One more press turns the speed back to Level 1. Every time you change the speed level, you will also hear the remote beep and see the lights flash on the drone.
10 years old operating the drone alone. ● Only operate the drone in a legal airspace. ● Black Falcon is not liable for any damage caused by the improper use, assembly, or operation.
Safety Precautions This aircraft has spinning rotor blades that can be hazardous when handled improperly. Poor assembly, broken parts, and improper operation will result in damage to the device or your personal property. Pilots must observe their surroundings at all times and only use the device within its intended parameters.
Page 17
FAQs How long does it take to charge the drone? It takes between 60-70 minutes to reach a full charge. Can you fix the balance? You can offset the balance by pressing the Fine-Tuning buttons to stabilize the drone. Does it have Altitude Hold? You can lock the height and location precisely.
Page 18
My drone is not staying on course or is out of control. What should I Check to ensure that there are no strong winds that may be impacting the course of the drone. Try bringing the drone at least 30 cm from the ground to reduce instability. Follow the instructions for the Fine-Tuning function to further stabilize the drone’s flight.
Need help?
Do you have a question about the FREEZE2TRIM and is the answer not in the manual?
Questions and answers