License Rights The purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the normal nonexclusive, royalty-free license to use that arises by operation of law in the sale of a product.
Your organization received support phone numbers and other contact information appropriate for your geographic region and service agreement. Use that contact information for the most efficient response. However, if needed, you can also find general support contact information on the Motorola Solutions website, by following these steps: 1.
MN010550A01-A Document History Document History Version Description Date MN010550A01-A Initial release of the CommandCentral Interview Room December 2023 Hardware Overview and Quick Installation Guide...
MN010550A01-A List of Figures List of Figures Figure 1: Interview Room Hardware........................7 Figure 2: Dell PowerEdge R250 Server View.....................9 Figure 3: Pelco Sarix Pro 4 Dome Camera View....................10 Figure 4: Pelco Sarix Modular Cameras and Main Unit View................11 Figure 5: Louroe Audio Monitoring System View....................13 Figure 6: Microphone Components View......................13 Figure 7: Audio Monitoring System Setup –...
Chapter 1: Interview Room Hardware Overview Chapter 1 Interview Room Hardware Overview CommandCentral Interview Room typically includes the following hardware. This may vary based on the hardware package selected by your Agency. Figure 1: Interview Room Hardware NOTE: Since room configurations are unique, and the length of the required cables varies, you must...
12. Connect dome cameras or main processor units to the PoE+ Switch with an ethernet cable. The cable is not provided. 13. Turn on the server. 14. To complete the cloud deployment, log on to CommandCentral Interview Room by accessing https:// interview.commandcentral.com/.
Lantronix Smart Managed Gigabit Ethernet PoE+ Switch The PoE+ Switch provides power to your CommandCentral Interview Room Cameras, and also provides a simple connection to the Dell Appliance and your Ethernet connection. For current product specifications and instructions see the Lantronix website.
2. To connect the camera to the CommandCentral Interview Room solution and get power to the system, connect the dome camera to the PoE+ with an ethernet cable. To configure zoom and focus, review the “Accessing Camera Settings” section in...
MN010550A01-A Chapter 3: Interview Room Hardware Component Details 3.3.2 Pelco Sarix Modular Cameras and Main Unit This is the most discreet camera solution available across the Pelco camera portfolio, offering two imager module options to capture scenes and people of interest. The Sarix Modular camera is NDAA-compliant and has open connectivity with leading 3rd party VMS and Pelco VideoXpert.
MN010550A01-A Chapter 3: Interview Room Hardware Component Details Component Image Details Pelco Sarix Modular 3MP ● The Microbullet Camera can be posi- Fixed Microbullet Camera tioned for discreet recording, which is especially useful for sensitive inter- views and soft rooms. ●...
MN010550A01-A Chapter 3: Interview Room Hardware Component Details Figure 5: Louroe Audio Monitoring System View For current specifications and instructions, please see Louroe Support. The microphone system consists of the following components: Figure 6: Microphone Components View Table 2: Microphone Components Description Item Description Microphone...
MN010550A01-A Chapter 3: Interview Room Hardware Component Details To set up the audio monitoring system, perform the following steps: Figure 7: Audio Monitoring System Setup – Reference 1. Connect the power adaptor to the +12 Vdc connector on the Audio Interface Adaptor (see A). 2.
MN010550A01-A Chapter 3: Interview Room Hardware Component Details Dell City Rocker Switch Figure 8: Dell City Rocker Switch View For current product specifications and instructions, see Del City support (also available as a PDF here). To set up the rocker switch, perform the following steps: 1.
Need help?
Do you have a question about the CommandCentral and is the answer not in the manual?
Questions and answers