Percussion Play Sonora HD Assembly Manual

Assembly Guide PPSWAV
1. Mark hole positions on wall,
then drill to manufacturers
specified diameter and depth
of M8 rawl bolt (See Wall Fix
installation sheet).
Wall Fixed
Sonora HD
Page 1 of 2
Components:
x2
M6 Saddle Straps
x4
10x38mm
Secure Screw
1100mm Max
900mm
Min Height
From ground
surface
Thread Lock Solution
Required (Not Supplied)
BS EN 1176
2. Once holes are drilled
insert M8 rawl bolts into
holes and set in place to
secure tightly.
WALL FIXINGS/ ANCHORS NOT SUPPLIED
FIXINGS NEED TO PASS THROUGH BODY OF INSTRUMENT (62mm) AND INTO THE WALL
.
HD SONORA WALL MOUNT POSITIONS
INSTRUMENT BODY WILL HAVE PRE DRILLED PILOT HOLES AS SHOWN ABOVE
Wall fixings are not supplied, installer will select suitable
Pair Small
Beaters X2
method of fixing. Suggested Fixing M8 Rawl Bolt
3. Attach instrument to rawl
bolts or other suitable wall
anchors (not supplied)
making sure they are tight to
the wall.
1.5m
4. Once all mounts are fixed
in place attach the beaters at
each end of the instrument
on directly to the wall.
Tools:
x1
x1
TX 40 Driver Bit TX 25 Driver Bit
{{
1.5m
Install Instrument
with 1m free space
(from widest point)
around it.
Spares available from
52 Kg
percussionplay.com or from your
local distributor