Percussion Play Rainbow Trio Assembly Manual

Installation Instructions
Wall Fixed
Rainbow Trio
Metallophone
Page 1 of 2
Instrument
Components:
x4
M8x20 Security Screw
x2
M6x20 Security Screw
x4
2 Part Cover Cap
x1
M6 Saddle Strap
Metric Conversion:
700mm/ 28"
850mm/ 33"
1m/ 39"
Weight of heaviest part
BS EN 1176
(1.1)
(1.3)
7kg (Metallophone)
Fence Fix
Pair Small Red
Beaters X1 Components:
2 Part Cover Cap
1. Attach the steel mount to
the rear of the instrument
with the M8 x20 screws and
2 part security caps. (1.1)
(See Assembly Guide)
2. Attach Railing Mount to
Fence with M8x40 and
Barrel Nuts provided. Make
sure this is locked tightly into
place (See Assembly Guide)
3.Fix Metallophone onto
Plastic railing mounts at
desired height for users using
screws provided (See
Assembly Guide)
4. Fix through Plate with
fixings supplied in correct
orientation and height for
intended Key stage. Cover
Fixings with 2 Part Caps
supplied
5. Attach the 1 pair of beater
to the saddle strap on the leg.
(1.3)
x4
x8
x4
M8x20 Security Screw M8x40 Security Screw
Install Instrument with 1m free space (from widest point) around it.
1m
1m
KS1 – 700mm
KS2 – 850mm
Spares available from
x8
percussionplay.com
local distributor
M8 Barrel Nut
1m
KS1,2
Ground Surface
7 Kg
or from your