Page 1: Table Of Contents
The optional functions are signalled by the following symbol: The model number of your TV/DVD is on a label at the back of the set, and on the cover of the user manual. The pages of this publication are printed on recycled paper.
Page 2: Precautions
Do not place your eyes close to the opening of the disc tray or any other opening to look inside the player. The TV/DVD’s components are sensitive to heat.The maximum ambient temperature should not exceed 35°...
Page 3: Switching On
9:46 Page 3 Switching on More info... Follow the instructions on this page to use your TV/DVD set and the remote control unit before entering the channel set-up procedure described on the next page. INSERTING THE BATTERIES: – Put the batteries in the remote control unit.
Page 4: Initial Set-Up
TV menus, as well as for DVD menus, dialogues and subtitles. Power the TV/DVD set with the On/Off switch A located at the front and scrupulously follow the steps 1 to 7 of this page.
Page 5: Completing Set-Up
More info... The settings on this page will be useful if you find that some channels have not been memorised on initial set-up or auto update. This can happen if you set channels up from a cable network. Setting up channels manually requires every setting for every Personal settings: display the INSTALLATION SUMMARY by holding down the tv menu key on the remote control unit.
Page 6: Tv Remote Control
The other keys to control your television Your remote control can control several pieces of equipment. This page shows you the functions of the TV part. For the DVD part, see page 12.To control other Sound equipment, see page 20.
Page 7: Everyday Use
Everyday use More info... The explanations given on this page will enable you to adjust the image of your TV/DVD set and to program your device to alarm- Turning the TV/DVD on and off: the TV/DVD is turned on and off clock or self-stopping mode.
Page 8: Stereo/Nicam/Virtual Dolby Sound
The NICAM process consists of sending digital stereo sound comparable to that from an audio CD via a land based transmitter in addition to its usual mono equivalent. So by means of the NICAM process, you can get digital sound with the quality of a laser Sound type compact disc.
Page 9: Teletext
The service consists of information database (weather, sports results, news, games, etc.) available at all times. Sub-page: some channels broadcast Alarm pages that can be The different headings shown on-screen by blocks of colour are accessed by a single press on the key of the same colour on the displayed at a chosen time.
Page 10: Program Info (Tv Guide)
TV/DVD screen, you may easily programmes or make a list of programmes that you want to watch or record.You are also able to download timer information to programme your NexTView-Link video recorder on recording the a NexTView link video recorder to record a programme or automatically start your TV/DVD at the beginning of the chosen telecast of your choice.
Page 11: Dvd Menus
More info... This page shows you the different menus available in DVD mode. If the TV/DVD set is in stand-by mode, switch it on by pressing the PLAY key of the remote control. If the TV/DVD set is in TV mode, press the tv/dvd key of the remote control or keyboard.
Page 12: Dvd Remote Control
The keyboard keys located on the TV/DVD frontside have the same functions Sound as those of the remote control, except for the OPEN/CLOSE key, which is only To put your TV/DVD set in stand-by. available on the keyboard and enables you to open or close the disc drawer.
Page 13: Playback
Video CDs. 12 cm and 8 cm, single or double sided, single or dual layer. DVDs are high density optical discs on which high quality picture When you press on this remote control key, the image centre is and audio are recorded by means of digital signals.
Page 14: Playback Modes
In the Program Play mode, the sequence sorting is made according to the list given in the “Edit Program” menu. If no list has been elaborated, this mode cannot be selected. It is also inhibited if a rating limit EDIT PROGRAM has been set for the film, unless the parental code is entered.
Page 15: Display And Sound
The SOUND menu enables you to enable dynamic range compression and choose the type of sound assigned to the digital output. To reproduce the sound of a movie theatre from the sound recorded on your Dolby Digital DVDs, connect a Dolby Digital (AC-3) TV IMAGE amplifier/decoder to the optical digital audio output jack and select the sound type in the Sound menu.
Page 16: Preferred Languages
More info... During the initial installation (page 4), the language you choose during the first step has automatically been selected for the DVD part. Nonetheless, you may change the language for the player menus, and choose the languages you prefer for dialogues, sub- The different languages and sub-titles that are available are titles and disc menus.The language selection of the DVD part does not affect the language of the TV part.
Page 17: Locking
Locking More info... This function enables you to control the access to the player. Select the Lock menu, and press ok to confirm. If you forgot your password, you can cancel the lock code; to do this, when you are asked for your password, press the OPEN/CLOSE key...
Page 18: Info Menus
The repeat principle is a loop reading between a starting and a finishing point. On some discs, interactive menus may appear To display all the information, start reading a disc with the PLAY key, then press the info (yellow) key of the during playback: you must activate some functions within the remote control.
Page 19 The player can memorise up to 6 places on the disc, as long as the disc remains in the player (and if the TV/DVD set has not another button indicating a trash can.
Page 20: Remote Control Unit: Other Equipment
Rewind. 2. Hold the tv menu key down and enter one of the 3 figure codes corresponding to the make of your unit (the code list can be found at the end of this manual). 3. Release the tv menu key.
Page 21: Connections
More info... Select the connected equipment with the av key of the remote control. Press once for AV1, twice for AV2, or three times for AV3. For some sources, the AV1 or AV2 selection is automatic (slow or fast switch).
Page 22: Tv Menus
9/10/00 9:46 Page 22 TV menus E m i s s i o n s F r i .
Page 23: Dvd Main Menus
9/10/00 9:47 Page 23 DVD main menus If no disc has been loaded, the menu appears automatically. If a disc is being played, press STOP. To select a menu: with keys , select a menu, then press on the ok key. Sub-menus appear.

THOMSON ICC17 Manual

Quick Links

Related Manuals for THOMSON ICC17

Summary of Contents for THOMSON ICC17

Table of Contents