Other Problems - THOMSON DTH8560E Manual

02_DTH8560_en.qxd
Further information
The menus of your DVD recorder do not
appear in the language you want
• Check that your language is available in the
settings menu. If not, choose another language.
You can't access the selected menu, even
when you press OK
• If the name of the menu appears on a
transparent background, it means that the
corresponding menu or function is not
available.The Disc, Titles, Playlist and Card
menus are contextual menus: they depend on
operations performed beforehand such as:
• Disc is only accessible if there is a disc in the
disc tray of your DVD recorder.
• Titles is only accessible once you have
recorded a TV program or video sequence
(from an external device).
• Play list is only accessible with a CD.
• Card is only accessible once you have
connected a card reader to the front USB
socket and inserted a card in it.
Your DVD recorder menu disappears
• As with computers, your DVD recorder has a
screen saver which replaces the fixed menu by
a mobile THOMSON logo. Press on a navigation
key to bring back the fixed menu.
You can't switch channels
• During the recording of a TV program (or video
sequence from a connected device), switching
channels is impossible.To change channels, you
have to stop the recording completely.
In quiet moments, you hear a slight hum
coming from your DVD recorder
• Your DVD recorder is equipped with a fan. It
releases heat in order to ensure proper
cooling. It switches on as soon as your DVD
recorder is turned on and produces a slight
hum.
The TV guide (NAVICLICK) is not
displayed
• Downloading may be disabled. Make sure that
Off is not ticked .
• Does the channel broadcast a TV guide?
23/09/05 14:45 Page 38

Other problems

Reconfiguring your player's initial set-up
• Open the disc tray and make sure there is no
disc in it. Close the disc tray. Hold down the
STOP key of your DVD recorder, then press
the ON/STANDBY key by holding it down
for 3 seconds, until INIT is displayed on the
screen of your DVD recorder.When MENU
reappears on your display, turn off and then
turn on your DVD recorder using the
ON/STANDBY button on the front.The
menu displayed on-screen is the menu which
enables you to choose your DVD recorder's
display language. It confirms that all settings
made since initial installation have been deleted.
The DVD recorder has been reconfigured as it
was when purchased (factory settings). Refer to
page 5 of this manual to restart the installation
of your DVD recorder.
If you forget your password
• Open the player's disc tray and ensure that
there is no disc on it. Close the tray.The player
menu is now displayed on the TV screen. Now
press the STOP key on your player and hold
the STOP key on the remote control unit
down for 3 seconds.The password that you
chose for parental control is cancelled.
38