Advertisement

Quick Links

3515387.1
Please read all instructions carefully before use and
retain for future reference.
CAUTION Do not immerse in water.
Wear a dust mask.
Protect your eyes, ears and hands
Do not suitable in wet conditions.
Keep bystanders clear
A5P | 01
INTENDED USE Only operate the power tool/machine
for its intended purpose and within the parameters
specified in this manual.
This power tool/machine is for domestic use only. Do not
use outdoors during wet conditions.
This power tool/machine is not intended for use by per-
sons with reduced physical, sensory or mental capabil-
ities, or lack of experience and knowledge, unless su-
pervised or given appropriate instruction concerning the
product's use by a person responsible for their safety.
GENERAL PRECAUTION Do not allow to be used as a
toy. Children should be supervised to ensure they do not
play with the power tool/machine.
If the power tool/machine is not functioning properly,
has been dropped, damaged, left outdoors, or immersed
in liquid, do not use, contact DOMU Brands Customer
Services.
Do not use the power tool/machine if any parts appear to
be faulty, missing or damaged.
Ensure all parts are securely attached before use.
RISK OF PERSONAL INJURY Avoid body contact with
earthed or grounded surfaces such as pipes,radiators,
ranges and refrigerators. There is an increased risk of
electric shock if your
body is earthed or grounded.
Prevent unintentional starting. Ensure the switch is in the
off position before connecting to the power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch, or energising
power tools that are switched on, invites accidents.
Do not operate power tools in explosive atmospheres
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
Always wear eye protection. Any power tool can throw
foreign objects into your eyes and cause permanent
eye damage. Always wear safety goggles (not glasses)
that comply with ANSI safety standard Z87.1. Every day
glasses have only impact resistant lenses.
Do not expose power tools to rain or wet conditions.
Water entering the power tools will increase the risk of
electric shock.
Stay alert, watch what you are doing and use common
sense when operating a power tool/machine. Do not use
a power tool/machine while you are tired or under the
influence of drugs, alcohol or medication. A moment of
inattention while operating power tool/machine may re-
sult in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to power source and/or
battery pack, picking up or carrying the tool.
Carrying power tool/machine with your finger on the
switch or energizing power tool/machine that have the
switch on invites accidents.
Remove any adjusting key or spanner before turning the
power tool/machine on. A spanner or a key left attached
to a rotating part of the power tool/machine may result in
personal injury.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3515387.1 and is the answer not in the manual?

Questions and answers

Summary of Contents for VonHaus 3515387.1

  • Page 1 3515387.1 INTENDED USE Only operate the power tool/machine for its intended purpose and within the parameters specified in this manual. This power tool/machine is for domestic use only. Do not use outdoors during wet conditions. This power tool/machine is not intended for use by per-...
  • Page 2 Do not overreach. Keep proper footing and balance at CLEANING & MAINTENANCE Never soak or immerse all times. This enables better control of the power tool/ electrical components and or a component that has a machine in unexpected situations. plug attached. Dress appropriately.
  • Page 3: Technical Specification

    Declare under our sole responsibility the product: such as the following must be avoided at all times: •Electrical sparks and arcs from the discharge of static electricity from poorly earthed equipment. •Electrical short circuits. 3515387.1 •Naked flames. •Lit cigarettes, cigars, pipes. Description •Portable battery equipment.
  • Page 4: Component List

    COMPONENTS COMPONENT LIST Viscosity Cup. 1.8mm Nozzle (pre-installed) Pattern Adjuster. Cleaning Needle. 2.6mm Nozzle Nozzle Locking Wheel. Cleaning Brush. 3.0mm Nozzle Trigger. 5x Paper Filters. Rubber Gaskets (for Fixed Nozzle & Container). Spray Gun Seat. 1.0mm Nozzle O-Ring Quick Release Button. Spray Gun Unit.
  • Page 5 MATERIAL PREPARATION IMPORTANT Before spraying, the material being used may need to be thinned with solvent; as specified by the material manufacturer. WARNING Do not use materials with a flashpoint below 21°C (70ºF). NOTE Follow the instructions below. Stir the spraying material thoroughly before measuring viscosity.
  • Page 6: Recommended Material

    NOZZLE RECOMMENDATIONS & APPLICATIONS RECOMMENDED PROPOSED NOZZLE SIZE PROJECT MATERIAL VISCOSITY Railings, multi-frame window frames, Polyurethane, heating pipes, Lower than chalk and milk garden furniture, 40Din-s type paints garage doors, metal garden fences 1.0mm- 1.8mm Low viscoisty, Internal walls, primer, wall wooden garden 45Din-s paint...
  • Page 7 ASSEMBLY Insert the Air Hose coupler into the top of the Spray Gun Unit. Turn clockwise to lock into position. Connect the other end of the Air Hose coupler into the rear of the Main Unit. Turn clockwise to lock into position. A5P | 01...
  • Page 8 ASSEMBLY If the task requires you to carry the Paint Station, attach the Shoulder Strap to each side of the Main Unit. Pull the straps tightly through the plastic adjustment tabs to secure. Attach the required size Nozzle to the Spray Gun as shown.
  • Page 9 ASSEMBLY Unscrew the Container from the Spray Gun and align the suction tube to suit the task at hand. For horizontal surfaces, turn the suction tube towards the Spray Gun (fig 1). When spraying surfaces overhead, turn the suction tube away from the Spray Gun (fig 2). NOTE! The Container should not be filled at this stage, the images are for illustration purposes.
  • Page 10: Surface Preparation

    SURFACE PREPARATION All objects to be sprayed should be thoroughly cleaned before spraying. NOTE When spraying outdoors, the spraying area must be free of dust in order to avoid Areas excluded from spraying should be masked off blowing dust onto the freshly sprayed surface. appropriately.
  • Page 11: Operation

    OPERATION To switch on, connect the Main Unit to a suitable Firmly grip the Spray gun and squeeze the Trigger mains outlet and turn on using the ON/OFF to release the paint. Adjust the volume of coating Switch on the top. as shown in the ‘FLOW ADJUSTMENT’...
  • Page 12: Spray Technique

    SPRAY TECHNIQUE Spray parallel to the surface with smooth passes at a consistent speed as illustrated below. Adhering to this ADVISORY It is strongly advisable to will avoid irregularities in the final finish. practice on a piece of cardboard or wood offcuts before proceeding on your intended Always apply a thin coat of material on the first pass workpiece...
  • Page 13: Maintenance

    MAINTENANCE Switch off the Paint Station and release the trigger Remove the Container and empty any remaining so that any remaining coating in the Spray Gun coating back into the tin. Clean the Container with flows back into the Container. a scrubbing brush along with warm ,soapy water.
  • Page 14 MAINTENANCE With the Main Unit switched back on, aim the Spray Gun at the sink or a large container and squeeze the Trigger to discharge the water. Continue to do so until the water runs clear. This will remove any remaining coating on the Nozzles and aid cleaning in the next stages. CAUTION! Never run the Spray Gun with a completely empty container.
  • Page 15 MAINTENANCE Disassemble the Spray Gun Unit and clean thoroughly using the Cleaning Brush (and Needle if required) supplied with warm water and mild detergent. Ensure all the accessories are completely dry before reassembling. If you notice a reduction in the performance of the Paint Station, this may indicate the filter needs to be cleaned.
  • Page 16 MAINTENANCE - SPARE SEAL REPLACEMENT Regularly check the condition of the Seals and O-Ring. If you notice any signs of deterioration, please use the spares that are supplied to prolong the lifespan of the Paint Station. See the image below for reference on the position of the seals and O-Ring. A5P | 01...
  • Page 17: Troubleshooting

    TROUBLESHOOTING PROBLEM CAUSE SOLUTION 1. Nozzle clogged 1. Clean 2. Clean 2. Suction tube clogged LITTLE OR NO PAINT FLOW 3. Suction tube loose 3. Insert 4. No pressure build up 4. Tighten container 5. Air Filter clogged 5. Change 1.
  • Page 18 Thank you for purchasing your product/appliance. Should you require further assistance with your pur- chase, you can contact us at support@domu.co.uk VonHaus is a registered trademark of DOMU Brands Ltd. Made in China for DOMU Brands. M24 2RW. A5P | 01...

Table of Contents