Related Manuals for Hyundai HPDEL200
Summary of Contents for Hyundai HPDEL200
- Page 1 3-IN-1 MULTI-FUNCTION SANDER MODEL: HPDEL200 ORIGINAL INSTRUCTIONS READ THE INSTRUCTIONS BEFORE USE THIS TOOL !
-
Page 2: Table Of Contents
ORIGINAL INSTRUCTIONS >EN CONTENT: 1. SAFETY WARNINGS................3 2. INTENDED USE..................5 3. YOUR TOOL....................6 4. ASSEMBLY....................7 5. USE......................9 6. MAINTENANCE..................9 7. TROUBLESHOOTING................9 8. DISPOSAL....................10 9. CE DECLARATION OF CONFORMITY.............10 10. WARRANTY....................11 11. PRODUCT FAILURE.................12 12. WARRANTY EXCLUSIONS..............13... -
Page 3: Safety Warnings
ORIGINAL INSTRUCTIONS >EN 1. SAFETY WARNINGS General power tool safety warnings WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. - Page 4 ORIGINAL INSTRUCTIONS >EN e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts.
-
Page 5: Intended Use
ORIGINAL INSTRUCTIONS >EN Keep handle and sander free of oil, grease, water and other liquids. Never touch the sander before it stops. Do not touch the workpiece or metal chips before cooling. Do not use the sander to work on magnesium parts. Residual risks Some dusts produced by sanding, sawing, grinding, drilling and other construction operations contain recognized chemical elements capable of causing cancer, birth defects or other reproductive problems. -
Page 6: Your Tool
7 Release button dust collection box 17 Triangular sanding plate 8 Dust collection box lid 9 Tab for opening the dust collection box 10 Dust collection box b. Technical data Model HPDEL200 voltage 230 V~ ,50 Hz Power 200W Protection class Degree of protection... -
Page 7: Assembly
ORIGINAL INSTRUCTIONS >EN Vibration and noise emission Sound pressure level: 79 dB(A), K=3 dB Sound power level: 90 dB(A), K=3 dB Vibration: ah=13.7 m/s², K=1,5m/s Information: The declared vibration total value has been measured in accordance with a standard test method and ... - Page 8 ORIGINAL INSTRUCTIONS >EN Mounting the orbital sander disc and triangular sanding plate: Fig B 1). Insert the 4 rubber pins with the latching nose into the 4 recesses in the sanding disc 2).Place the desired sanding disc on the mounting plate. The rubber pins fit into the recesses of the device. Only one position is possible.
-
Page 9: Use
ORIGINAL INSTRUCTIONS >EN 5. USE Switching on/off WARNING! Make sure that the power supply voltage matches the voltage rating indicated on the device‘s type plate. CAUTION: Always hold the Sander securely by the Soft Grip Handle. 1). To switch on, push the on/off switch (3) to position „I“. The tool will power on. 2). -
Page 10: Disposal
ZI, 32, rue Aristide Bergès – 31270 Cugnaux - France Tel : +33 (0)5.34.502.502 Fax : +33 (0)5.34.502.503 States that the designated below machine: Product: 3-IN-1 MULTI-FUNCTION SANDER Model: HPDEL200 Serial number: 20210736614-20210737113 Developed, designed and manufactured in accordance with the requirements of directives: Machinery Directive 2006/42/EC... -
Page 11: Warranty
10. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 12: Product Failure
11. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the the repairer will refuse the machine. -
Page 13: Warranty Exclusions
12. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
Need help?
Do you have a question about the HPDEL200 and is the answer not in the manual?
Questions and answers