Worldline Link/2500 Portable Flex Quick Manual

Link/2500
Portable Flex
Quick guide
Function
Switching on the terminal
Opening the main menu
Change communication type
Change communication type
Setup
Configuration
Initialisation
Software update
Terminal reset
Info
Information receipt
Print Hardware info
System
Delete Pending Mails
Activate automatic key lock
Unlock key lock
Description
Pressing and holding the green button switches the
terminal on.
Press key to open the main menu
Setting up from 4G to WLAN
Switching from WLAN to 4G <4> <5> <Password>
It is possible to reach this menu item only with the
terminal password.
The terminal retrieves the latest configuration
parameters.
Individual or all card issuers are reinitialised.
The terminal loads the latest version of the software.
Caution! Downloading the software can take several
minutes. Never pull out the plug.
This function is available only to service technicians and
is protected with a special password.
The terminal ID and current version of the software are
displayed.
The current configuration is displayed on the terminal.
This function is available only to service technicians and
is protected with a special password.
Use this function only if you are requested to do so by
our hotline.
Use this function only if you are requested to do so by
our hotline.
The automatic key lock can be activated manually.
After a certain period of inactivity, the terminal is
automatically locked. Press and to unlock
Buttons
<4> <5> <Password>
<1> <select comm type>
<2> <WLAN> <1> <WLAN>
<1> <Manage Networks>
<1> <New Access Point>
<4> <5> <Password>
<1> <select comm type>
<2> <GPRS>
<5> <Password>
<5> <Password> <1>
<5> <Password> <2>
<5> <Password> <3>
<5> <Password> <4>
<5> <Password> <5>
<5> <Password> <6>
<1> basic / <2> detailed
<5> <Password> <8>
<5> <Password> <9>
<5> <Password> <9>
<Password> <10>
<4> <2> <1>