Table of Contents
Advertisement
7-
Maintenance and
cleaning
Read "Safety Instructions" section first!
Unplug the product and turn off the
tap before attempting any cleaning
procedures.
Do not use abrasive substances for
cleaning.
Clean the filter and impellers at least
once a week in order for the machine
to operate efficiently.
Service life of the product extends and
frequently faced problems decrease if it is
cleaned at regular intervals.
Cleaning the outer surface of the
product
NOTICE Clean the outer surface and door
gaskets of the product gently with a mild
cleaning material and damp cloth. Wipe the
"control panel" only with a damp cloth.
Cleaning the interior of the
machine
• Clean the interior of the machine
by operating the machine in the
programme running at the highest
possible temperature with detergent
or special machine cleaning agents
monthly. This operation will help
removal of leftovers and limescale from
the interior of the machine.
• If water has remained in the machine,
drain the water by performing the
procedures under the topic "Cancelling
a programme". If the water cannot
be discharged, remove the filters
as specified in the "Cleaning the
filters" section and check if there
are any leftover deposits that have
accumulated at the bottom of the
machine, blocking the water path.
Clean if necessary.
Cleaning the filters
Clean the filters at least once a week in
order for the machine operates efficiently.
Check if food residues are left on the filters.
If there are food residues on filters, take
them out and clean well under running
water.
1. Turn the micro filter (1) and coarse filter
(2) assembly counter clockwise and
pull it out from its seating.(depends on
model)
2. Pull out the metal/plastic filter (3) from
the seating.
3. Press the two pawls on the coarse filter
inwards and separate the coarse filter
from the assembly.
39/EN
Advertisement
Table of Contents
