Basic operations of the GO:KEYS
This section explains the basic operations for the buttons and knobs of the GO:KEYS.
Editing a value
Changes the setting values.
Dial
Turn the dial clockwise to increase the
value, or counter-clockwise to decrease the
value.
Moves the cursor
Multiple settings (parameters) and items to select are shown on
the display. To edit these settings using the dial, move the cursor
to the item you want to edit.
Use the following methods to move the cursor.
Cursor [Ì] [Ê] buttons
Press one of the cursor [Ì] [Ê] buttons
to move the cursor in the corresponding
direction.
Purpose
Operation
Moving the cursor
Hold down the desired cursor [Ì] [Ê] button.
continuously
Moving the cursor
While the cursor moves repeatedly, press the opposite
rapidly
cursor [Ì] [Ê] button at the same time.
Confirming a value
To confirm a value or execute an operation,
press the [enter] button.
Canceling an operation
Press the [exit] button to cancel an
operation.
This button is also used when exiting a
screen or closing a window.
Function buttons [f1]–[f4]
Press these buttons to select the
parameters shown at the bottom of the
display or to execute a function.
Menu display
Press the [menu] button to show the
menu. Select a parameter to make detailed
settings.
Mixer
Mixer
Ø "Adjusting the volume balance for the parts (Mixer)" (p. 54)
Scene Edit
Scene Edit
Ø "Selecting and configuring a scene" (p. 18)
System
System
Ø "Editing the system settings" (p. 52)
Center Cancel
Center Cancel
Ø "Using the center cancel function (Center Cancel)" (p. 12)
Utility
Utility
Ø "Convenient functions (Utility)" (p. 43)
Information
Information
Ø "Version information screen (Information)" (p. 12)
11