User license
The additional content from Roland Cloud is linked to the license held
by the user who downloaded the data.
You can't import or install contents for a different user license into a
single GO:KEYS instrument.
User A
EXZ001
To import or install a Model Expansion associated with a user
license that's different from the user license registered on the
GO:KEYS, follow the steps below to initialize the user license.
Initialize
Initializing a user license
Initializing a user license lets you import/install additional contents
(Sound Packs or Wave Expansions) that were downloaded with a new
user license.
NOTE
¹ This deletes the currently installed Wave Expansions.
¹ The imported Style Packs are deleted.
1 .
Press the [menu] button.
The Menu screen appears.
2 .
Select "Utility" and then press the [enter] button.
The Utility Menu screen appears.
3 .
Select "Fact Reset" and then press the [enter] button.
The FACTORY RESET screen appears.
16
User A
User B
EXZ005
EXZ005
User A
User B
EXZ005
EXZ005
(Remove License)
4 .
Press the [f1] (USER) and [f2] (SYS) buttons to leave only
the "Remove License" check box selected.
* If you haven't installed a user license yet, the Remove License check box
is not shown.
* When you select check boxes other than Remove License and then
execute, all of the files corresponding to the check boxes you select are
initialized.
Ø For details, refer to "Factory reset" in the GO:KEYS Reference Manual.
5 .
Press the [f4] (EXECUTE) button.
A confirmation message appears.
Use the cursor [ Ì ] [ Ê ] buttons to select "OK", and then
6 .
press the [enter] button.
If you decide to cancel, select "Cancel" and press the [enter] button.
NOTE
Never turn off the power while "Executing... " or a similar message is
shown.
When the factory reset operation is finished, "Power Off, Then On. "
is shown onscreen.
7 .
Turn the power of the GO:KEYS off, then on again.
This initializes the user license.