Features of your vehicle
When the vehicle is stationary, and the
steering wheel is turned all the way to
the left or right continuously, the steer -
ing wheel becomes harder to turn. The
power assist is limited to protect the
motor from overheating.
As time passes, the steering wheel will
return to its normal condition.
Tilt and telescopic steering wheel
A tilt and telescopic steering wheel
allows you to adjust the steering wheel
before you drive.
You can also raise it to give your legs
more room when you exit and enter the
vehicle.
The steering wheel should be positioned
so that it is comfortable for you to drive,
while permitting you to see the instru -
ment panel warning lights and gauges.
WARNING
Steering Wheel Adjustment
Never adjust the angle and height of the
steering wheel while driving. You may
lose steering control.
Adjusting steering wheel angle
and height
OSG2H041021_2
1. To change the steering wheel angle,
pull down the lock release lever (1).
2. Adjust the steering wheel to the
desired angle (2) and height (3).
3. Pull up the lock-release lever (4) to
lock the steering wheel in place.
4. Be sure to adjust the steering wheel to
the desired position before driving.
NOTICE
After adjustment, sometimes the lock-
release lever may not lock the steering
wheel.
It is not a malfunction. This occurs when
two gears engage. In this case, adjust
the steering wheel again and then lock
the steering wheel.
WARNING
僅 After adjusting, push the steering
wheel both up and down to be certain
it is locked in position.
僅 While adjusting the steering wheel
angle and height, please do not push
or pull it hard since the fixture can be
damaged.
僅 Do not press or pull the steering wheel
hardly while adjusting. The steering
wheel column may be damaged.
Heated steering wheel (if
equipped)
With the EV button in the ON position,
pressing the heated steering wheel but -
ton warms the steering wheel. The indi -
cator on the button will appear.
OSG2H041022
Steering wheel
5
5
55
Need help?
Do you have a question about the Niro EV 2023 and is the answer not in the manual?