Table of Contents
Advertisement
Available languages
Available languages
en
Taking out glass shelf above vegetable
container
Fig. -
The glass shelf can be taken out and
disassembled for cleaning.
Note
Before taking out the glass shelf, pull out
vegetable container.
Cleaning the ice maker
Clean the ice maker regularly. This will
prevent ice cubes, which were made
quite a long time ago, from shrinking,
having a stale taste or sticking together.
Fig. ,
1. Remove and empty the ice cube tray
and storage container.
2. Press the push-button to release the
ice maker from the holder.
3. Remove the ice maker.
4. Lift the rear end of the holder and
lower behind the glass plate.
5. Remove the holder towards the front.
6. Clean all parts of the ice maker with
warm water.
7. Allow all parts to dry completely.
8. Assemble the ice maker in reverse
order and insert.
Light (LED)
Your appliance features a maintenance-
free LED light.
These lights may be repaired
by customer service or authorised
technicians only.
20
Tips for saving energy
Install the appliance in a dry, well
■
ventilated room! The appliance should
not be installed in direct sunlight
or near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
Allow warm food and drinks to cool
■
down before placing in the appliance.
Thaw frozen food in the refrigerator
■
compartment and use the low
temperature of the frozen food to cool
refrigerated food.
Open the appliance as briefly as
■
possible.
To achieve the lowest energy
■
consumption, leave a small wall gap
at the side.
Do not block the ventilation openings
■
in the appliance.
Do not remove or relocate the upper
■
glass shelf.
Advertisement
Table of Contents
