Installing The Speaker Module; Display Panel; Removing The Display Panel - Dell W14B Owner's Manual

Installing the speaker module

1. Insert the speaker module into the slot on the chassis.
2. Tighten the screws to secure the speaker to the chassis.
3. Secure the speaker cables through the retention clips.
4. Connect the speaker cable to the connector on the system board.
5. Install the:
a. system board shield
b. speaker cover
c. back cover
d. cable cover
e. stand
6. Follow the procedure in

Display panel

Removing the display panel

1. Follow the procedure in
2. Remove the:
a. stand
b. back cover
c. cable cover
d. speaker cover
e. speaker
f. hard drive
g. optical drive
h. VESA mount bracket
i. system board shield
j. SSD card
k. WLAN card
l. memory
m. heat sink
n. system fan
o. processor
p. coin cell battery
q. power supply unit
r. system board
s. chassis frame
3. To remove the display panel:
a. Remove the screws that secure the display panel to the bezel.[1].
b. Lift the display panel away from the bezel. [2].
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly 27