Contents 9 Additional information 1 Safety Charge your USB device Reset the system 2 Your car audio system Replace the fuse Introduction What's in the box 10 Product Information Overview of the system 11 Troubleshooting 3 Install the car audio system Connect wires 12 Notice Mount into the dashboard...
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. • Modification of the product could result in hazardous radiation of EMC or other unsafe operation.
What's in the box system Check and identify the contents of the package: Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction a Main unit (with a sleeve)
Overview of the system t srq l k j i h • Connect to a USB storage device. • Unlock the front panel. f MP3-LINK • Connect to the audio output socket • For .mp3 tracks, press to select the (usually the headphone socket) of an previous folder.
Page 7
• In radio mode, press to select the • Press repeatedly to display available preset radio station of No. 5. information about the current track. • In radio mode, press and hold to store • Press repeatedly to display available the current radio station at channel No.
3 Install the car • Press repeatedly to select a tuner band. audio system • Insert an SD/SDHC card. Caution • Press to reset the system to factory default settings. • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence.
ISO male Connect to Connect wires connectors Yellow strip To the +12V car Note battery which is energized at all • Make sure that all loose leads are insulated with times electrical tape. • Consult a professional to connect wires as instructed below.
Install the sleeve into the dashboard and Mount into the dashboard bend the tabs outward to fix the sleeve. • If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. •...
Attach the trim plate. Detach the front panel Note • Before you insert an SD/SDHC card or reset the system, detach the front panel. • Before you detach the front panel, make sure that the system is turned off. Press to release the front panel.
4 Get started Set the clock Press and hold to access the system For the first time use menu. Press repeatedly until Press to turn on the system. displayed with time digits blinking. is displayed and then » Rotate anti-clockwise to set the hour. Rotate clockwise to set the minute.
5 Listen to radio Mute the button beep The beep sound of buttons is enabled by Switch to radio mode default. Press and hold to access the system menu. Press repeatedly to switch the source to Press repeatedly until is displayed. Press repeatedly to select a band.
Search for a radio station Play with RDS Search for a radio station The RDS (Radio Data System) function operates only in areas with FM stations automatically broadcasting RDS signals. If you tune to an RDS Press to search for the previous or station, the station name is displayed.
Page 15
Rotate to select a setting. Item Program type Description • : Enable the AF function. Sports • : Disable the AF function. Education and advanced Set the region for AF tuning training You can set the region for AF tuning. Radio plays and literature Press and hold...
6 Play from a Synchronize the system clock storage device You can synchronize the system clock with an RDS station that transmits time signals. Press and hold to access the system menu. This system can play .mp3 files that are copied Press repeatedly until onto a compatible storage device.
Press repeatedly to switch Switch tracks the source. • : For a USB storage device that is During play, you can switch tracks or folders connected to the USB socket on the quickly. front panel • : For an SD/SDHC card that is inserted into the slot Switch tracks directly...
7 Listen to an 8 Adjust sound external player The following operations are applicable to all supported media. You can use the system to amplify the audio Button Function input from an external player, for example, Rotate to increase or decrease the MP3 player.
If the fuse gets damaged immediately after it is If the system works abnormally, reset the replaced, an internal malfunction may occur. In such system to factory default settings. case, consult your Philips retailer. Detach the front panel. Press the button with the tip of a ball-point pen or toothpick.
12 V DC (11 V - 16 V), unsolved, go to the Philips Web page negative ground (www.philips.com/support). When you contact Fuse 15 A Philips, make sure that the product is nearby Suitable speaker 4 - 8 and the model number and serial number are impedance available.