Sealey WORKSAFE 502YFK Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO
MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR
FUTURE USE.
1. INTRODUCTION
Includes helmet, mesh visor and clip-on ear defenders. Helmet conforms to BS EN397. Visor conforms to BS EN1731:2006. Ear
defenders conform to BS EN352-3.
2. CONTENTS
225
Mesh Gauze Visor
3. ASSEMBLY
FIG.1
1. Unscrew and remove the cover and clip from
the ear defenders.
FIG.3
PUSH
DOWN TO
CLIP IN
3. Clip the ear defenders to the helmet.
© Jack Sealey Limited
FORESTRY KIT
502YFK
MODEL NO:
502W
Plus Safety Helmet - Vented
FIG.2
COVER
CLIP
2. Reassemble using the visor attachment clip.
FIG.4
4. Attach the visor to the visor carrier.
Original Language Version
SSP19CO
Deluxe Clip-On Ear Defenders
VISOR ATTACHMENT
CLIP
226
Visor Carrier
502YFK Issue 2 15/01/24