Basic Operation; Switching On The Appliance; Setting A Programme; Adjusting The Programme Settings - Bosch WPG1410XEG User Manual And Installation Instructions

Table of Contents

Advertisement

en Basic operation
¡ Dry woollen items, sports shoes
and soft toys in the wool basket
→ "Wool basket", Page 32

Basic operation

12 Basic operation
Basic operation
12.1 Switching on the appli-
ance
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Turn the programme selector to a
programme.
Note: The lighting for the drum goes
out automatically.
12.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 24
If required, adjust the programme
2.
settings.
→ "Adjusting the programme set-
tings", Page 28
12.3 Adjusting the pro-
gramme settings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Requirement: A programme is set.
→ "Setting a programme", Page 28
Adjust the programme settings.
→ "Buttons", Page 20
Note: The programme settings are
not saved permanently for the pro-
gramme.
28
12.4 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 24
Requirements
¡ The laundry is prepared and sor-
ted.
→ "Laundry", Page 27
¡ The drum is empty.
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
12.5 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 28
Press
Start/Reload .
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "End" .
Note: If "Hot" appears, the appli-
ance cools the laundry.
When "Hot" goes out, the laundry
has cooled down.
12.6 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Press
Start/Reload .
1.
The cooling process starts auto-
matically after approximately 30
seconds and cools down the laun-
dry while the drum is rotating. If
you want to avoid or cancel the
cooling process, open the door.
→ "Display", Page 19
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.

Advertisement

Table of Contents
loading

Table of Contents