Removing The Stand And Mounting The Monitor - ViewSonic XG2409 User Manual

Removing the Stand and Mounting the Monitor

Refer to the table below for the standard dimensions for mounting kits.
NOTE: For use only with a UL certified mounting kit/bracket. To obtain a wall
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum Hole pattern
Loading (W x H)
14 kg 100 x 100 mm
NOTE: Mounting kits are sold separately.
1. Turn off the monitor and disconnect all cables.
2. Place the monitor on a flat, stable surface with the screen facing down.
3. Remove the stand.
4. Attach the mounting bracket to the VESA mounting holes at the rear of the
monitor. Then secure it with four screws (M4 x 10 mm).
5. Follow the instructions that come with the mounting kit to mount the monitor.
Interface Pad
(W x H x D)
115 x 115 x 2.6 mm
100 mm
11
Screw
Pad Hole
Specification
Ø 5 mm M4 x 10 mm
Screw
Quantity
4 pieces