Related Manuals for Nexigo ALR-F100
Summary of Contents for Nexigo ALR-F100
- Page 1 100" Fresnel Ambient Light Rejecting Screen for UST Projectors ALR-F100 User Manual Scan the QR code or visit our link to download the latest manual or watch the installation video. nexigo.com/manuals...
-
Page 2: Contact Information
From all of us here at NexiGo, we want to thank you for your trust in us. We look forward to serving you again in the near future. Sincerely,... -
Page 3: Cleaning Instructions
CLEANING INSTRUCTIONS Dust, dirt, and scratches on the screen will affect its quality and performance. For the best results refer to Fresnel Screen. the following instructions when you clean your 1. Please clean the screen surface with a soft brush or microfiber cloth periodically. A rough cloth may damage the screen's surface. -
Page 4: Parts List
PARTS LIST Thank you for choosing NexiGo! After unpacking your unit, please check the packaging to make sure that Parts List every piece on the is present. Name Image Quantity Name Image Quantity Fresnel User Manual Screen Leaf Spring Stretcher Nut... -
Page 5: Installation Steps
Name Image Quantity Name Image Quantity M4 x 6 Screw Velcro Wall Anchor Installation Mat and Screw Wall Mounting Gloves Bracket Adjustment Rod Connecting Rod INSTALLATION STEPS BEFORE YOU BEGIN 1. Installation requires people. Please do not attempt to assemble and mount the screen by yourself. 2. - Page 6 ASSEMBLING THE INNER FRAME 1. Arrange the following components as shown in the diagram below. Horizontal Inner Frame (J) x 4 Vertical Inner Frame (I) x 2 Inner Frame Horizontal Bracket (G) x 2 Inner Frame Corner Bracket (F) x 4 2.
- Page 7 3. Fasten the Inner Frame Horizontal Bracket (G) to the Horizontal Inner Frame (J) segment using one M4 x 6 Screw (U) placed in the outer hole. 4. Insert the Inner Frame Horizontal Bracket (G) into the other Horizontal Inner Frame (J) segment and fasten them together using one M4 x 6 Screw...
- Page 8 8. Fasten the Inner Frame Corner Bracket (F) to the Horizontal Inner Frame (J) segment using one M4 x 6 Screw (U) placed in the outer hole. 9. Insert the Inner Frame Corner Bracket (F) into its neighboring Vertical Inner Frame (I) segment and fasten them together using one M4 x 6 Screw...
- Page 9 10. Align the screw holes of the Outer Frame 4-Corner Joint (P) with the middle holes in the Inner Frame Corner Bracket (F). Fasten them together using two M4 x 6 Screws (U) as shown below. Ensure that the Outer Frame 4-Corner Joint (P) lines up with the centerline of the marked area.
- Page 10 11. Repeat steps 7–10 to fasten the other three corner brackets. 12. Insert the Support Beam (N) at an angle into the rabbet (interior gap) of the Horizontal Inner Frame (J). 13. Rotate the Support Beam (N) until it’s perpendicular to the Horizontal Inner Frame (J).
- Page 11 15. Repeat steps 12–14 to install the other Support Beam (N). 16. Install the Inner Frame L-Shaped Connector (H) into the rabbet of the Horizontal Inner Frame (J), in the middle where the two segments connect. Make sure to line up the holes on the bracket with the holes on the frame.
- Page 12 INSTALLING THE FRESNEL SCREEN BEFORE YOU BEGIN 1. Carefully remove the Fresnel Screen (A) from the tube and unroll it onto the Installation Mat (X). Make sure that both people handling the screen are wearing gloves. Front 2. If the Fresnel Screen (A) is not already face-down, flip it so that the rear side of the Fresnel Screen...
- Page 13 3. Place the Inner Frame over the Fresnel Screen (A) and line them up at the edges. Handle with care to avoid creasing the screen. 4. Insert the Horizontal Fiberglass Rods (S) into the black sleeves along the long edges of the Fresnel Screen (A).
- Page 14 6. Slide the Stretcher Bars (M) over the sleeves containing the Fiberglass Rods (S, T), as shown in the figure below. 7. Insert three Stretcher Nuts (D) into each Vertical Stretcher Bar (M). Insert six Stretcher Nuts (D) into each Horizontal Stretcher Bar (M).
- Page 15 39.68LB / 18KG Gross Weight 72.75LB / 33KG Product Model: ALR-F120 FRAGILE Manufacturer: Nexight INC HANDLE Serial Number WITH CARE 6 6 2 1 4 6 5 4 3 2 NexiGo-Projector Screen ALR-F120 FK T120JE P5D005B Made in China -14-...
- Page 16 39.68LB / 18KG Gross Weight 72.75LB / 33KG Product Model: ALR-F120 FRAGILE Manufacturer: Nexight INC HANDLE Serial Number WITH CARE 6 6 2 1 4 6 5 4 3 2 NexiGo-Projector Screen ALR-F120 FK T120JE P5D005B Made in China -15-...
- Page 17 39.68LB / 18KG Gross Weight 72.75LB / 33KG Product Model: ALR-F120 FRAGILE Manufacturer: Nexight INC HANDLE Serial Number WITH CARE 6 6 2 1 4 6 5 4 3 2 NexiGo-Projector Screen ALR-F120 FK T120JE P5D005B Made in China -16-...
- Page 18 HANDLE Serial Number WITH CARE 6 6 2 1 4 6 5 4 3 2 NexiGo-Projector Screen ALR-F120 FK T120JE P5D005B Made in China After finished installation, place the screen upright and observe whether the surface of the screen is flat. When making adjustments, please adjust the Stretcher Bolt (E) on the vertical frame first,...
- Page 19 INSTALLING OUTER FRAME 1. Insert one end of the Outer Frame Key (R) into a Horizontal Outer Frame (L) segment, making sure to line up the holes. Fasten them together using two M4 x 6 Screw (U). 2. Slide the neighboring Horizontal Outer Frame (L) segment over the Outer Frame Key...
- Page 20 39.68LB / 18KG Gross Weight 72.75LB / 33KG Product Model: ALR-F120 FRAGILE Manufacturer: Nexight INC HANDLE Serial Number WITH CARE 6 6 2 1 4 6 5 4 3 2 NexiGo-Projector Screen ALR-F120 Made in China FK T120JE P5D005B -19-...
- Page 21 39.68LB / 18KG Gross Weight 72.75LB / 33KG Product Model: ALR-F120 FRAGILE Manufacturer: Nexight INC HANDLE Serial Number 6 6 2 1 4 6 5 4 3 2 WITH CARE NexiGo-Projector Screen ALR-F120 Made in China FK T120JE P5D005B -20-...
- Page 22 Manufacturer: Nexight INC HANDLE Serial Number WITH CARE 6 6 2 1 4 6 5 4 3 2 NexiGo-Projector Screen ALR-F120 FK T120JE P5D005B Made in China Velcro Leaf Spring After finished installation, place the screen upright and observe whether the surface of the screen is flat.
- Page 23 REQUIRED TOOLS(NOT INCLUDED) TO INSTALL THE SCREEN Tape measure Stud finder Level Pencil Screwdriver with Hammer for Phillips screwdriver 5/16"(8mm) drill bit concrete anchors During the installation, you may use the above installation tools (not included). MOUNTING THE SCREEN ON THE WALL Warning: Do NOT mount the Fresnel screen on drywall.
- Page 24 2. Use a pencil to mark the drilling points, referring to the following measurements to identify two drill holes first. Hold up each Wall Mounting Bracket (Y) so that the upper left mounting hole lines up with your pilot holes. Mark the wall at the location of the other mounting holes and create new three pilot holes where you marked the wall.
- Page 25 Hammer the Wall Anchors (W) into each of the four pilot holes, and use four Screws (W) to drill the Wall Mounting Bracket (Y) into the Wall Anchors (W). Attach the Connecting Rod (Z2) to each of the Wall Mounting Bracket (Y), and then fix the Adjustment Rod (Z1) onto the...
- Page 26 FRAGILE Manufacturer: Nexight INC HANDLE Serial Number 6 6 2 1 4 6 5 4 3 2 WITH CARE NexiGo-Projector Screen ALR-F120 Made in China FK T120JE P5D005B Product Name 120'' ALR Rejecting Screen for UST Projectors Screen 105.55 × 62.24 × 1.46 IN / 268.1 × 158.1 × 3.7 CM...
- Page 27 Wall Mounting Bracket Wall Screen -26-...
- Page 28 Turn on your projector and line up the projected image with the borders of your Fresnel Screen. Rotate the Adjustment Rod (Z1) to adjust the height of the screen to achieve the best display effect. If the screen is higher than the image, then rotate the words clockwise and move the screen down. If the screen is lower than the image, then rotate the words counterclockwise and move the screen up.
- Page 29 FRAGILE Manufacturer: Nexight INC HANDLE Serial Number WITH CARE 6 6 2 1 4 6 5 4 3 2 NexiGo-Projector Screen ALR-F120 FK T120JE P5D005B Made in China Product Name 120'' ALR Rejecting Screen for UST Projectors Screen 105.55 × 62.24 × 1.46 IN / 268.1 × 158.1 × 3.7 CM...
- Page 30 Get in touch with FREE online services. facebook.com/letsnexigo...
Need help?
Do you have a question about the ALR-F100 and is the answer not in the manual?
Questions and answers