ABONG MINI TREBUCHET Assembly Instructions

K1023 Mini Trebuchet Instructions.ai 1 2018-08-01 5:09:12 PM K1023 Mini Trebuchet Instructions.ai 1 2018-08-01 5:09:12 PM
C
M
Y
CM
MY
CY
CMY
K
Remove and set aside the Axle (V), Ammo (W), and
the Cord (X). Sand both sides of the carrier boards first
with 150 grit and then 220 grit sandpaper.
Mirror Step 2 for the opposite side.
M I N I T R E B U C H E T
Glue a Corner Brace (G), an Outer Gantry Brace (C),
and a Gantry Upright (D) to a Side Frame (A). Glue the
side frame to the Base (B) and the Inner Gantry Brace
(E) to the side frame.
Join the Front Frame parts (H, I) together and glue it in
place. Glue the End Frame (F) to the corner braces.
Assemble the trough using the two Sides (K) and a
Bo om (J). Glue the trough to the base and frame.