THOMSON 32WS95EF - ACC 908 Manual page 13

ACC908-17L.qxd 21/02/02 18:43
Assembling the screen
CAUTION: when handling the monitor take care to do so using its central part and not the loud
speakers.
1 -
Make sure that the slots, provided on each screen retaining arm, slide fully over the lugs on the
wall mount as shown below (details A and B).
2 -
Make sure that all the slots are correctly engaged.
3 -
Fix the retaining arms using the two 6 x 14 bolts supplied.
CAUTION: check that all the slots on the retaining arms are correctly positioned on the lugs on the
wall mount and that the two bolts that hold each retaining arm are fully tightened.
3 slots
Layout of cabling
In order to avoid damage to the different cables, attach them using the 4 cable clips supplied.
CAUTION: only moderately tighten the cable clips. Too great a pressure on a power supply cable can
increase the risk of fire.
Retaining arm
4 holes are provided for
locating the cable clips.
Page 13
Fully tighten the bolts
Retaining
arm
Screen
Insert the clip in
the hole.
Lugs
A
Wall mount
Lug
B
Bolt 6x14
Fixing cables using
13
Slots
Lugs
A
Lug
Slot
B
the clip.
EN
EN