THOMSON 32WS95EF - ACC 908 Manual page 12

ACC908-17L.qxd 21/02/02 18:43
Fitting the screen retainer bars
Precautions when assembling
EN
EN
CAUTION: when handling the monitor take care to do so using its central part and not the loud
speakers.
• Ensure that the table or surface on which you intend to carry out the assembly is sufficiently large
and strong enough to bear the weight of the screen. The surface must be covered with a blanket or
other soft material in order to protect the glass of the screen.
• Before placing the screen flat on the soft surface, check that no object likely to damage it has been
inadvertently left there
• Take care not to strike the screen. A shock may break it and provoke injury.
Fitting the 2 bars
1 -
Place the screen flat, protected by a protective blanket or material.
2 -
Position the 2 retaining bars to the back of the screen by placing them both at the same height
as shown in the drawing.
3 -
Fix the retaining bars using the six 5 x 20 bolts supplied.
Page 12
Retaining arm
(Left)
Protect the screen with a
blanket or soft material.
Six 5 x 20 bolts
12
Retaining arm
(Right)
1 st hole from the top
of the screen
2 nd hole
5 nd hole