Page 1
200lbs. 3pt SPREADER OWNER’S MANUAL WARNING: Carefully read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Model # FTF-200S3PT 07132022...
Thank you very much for choosing this product! For future reference, please complete the owner’s record below: Model: FTF-200S3PT Purchase Date: _______________ Save the receipt, the warranty, and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.
WORK AREA • Keep work area clean, free of clutter, and well lit. Cluttered and dark work areas can cause accidents. • Keep children and bystanders away while operating a spreader. Distractions can cause you to lose control, so visitors should remain at a safe distance from the work area. •...
Page 4
ASSEMBLY INSTRUCTIONS Thread #13 stainless steel hex bolt M6x60 through hopper, then through #11 intermediate spacer B, and control handle assembly, and finally preassemble with #32 stainless steel hex lock nut M6. Insert the #38 stainless steel hex bolt M6x16 through the #60 stainless steel large washer, then through the hopper, and the control handle assembly, and finally pre-tighten the #32 stainless steel hex lock nut M6, adjust the position and then tighten the nuts.
OPERATION WARNING: Operator must read and understand all safety and warning information, operating instructions, maintenance and storage instructions before operating this equipment. Failure to properly operate and maintain the spreader could result in serious injury to the operator or bystanders. ...
Need help?
Do you have a question about the FTF-200S3PT and is the answer not in the manual?
Questions and answers