Other Settings - JVC LT-49K870 Instruction Manual

Other Settings

The Other Settings menu has more advanced setting that you can adjust, these are not everyday setting.
1. Press the MENU button and then press the
SETTINGS and then press the OK button. The SETTINGS menu will be
displayed.
2. Press the buttons to select MORE and then press the OK button.
Menu Timeout
Software upgrade
Auto TV OFF
Store Mode
Audio Video Sharing
Power Up Mode
Virtual Remote
CEC
CEC Auto Power On
Speaker
OSS
When in Smart or Media modes the CEC function will not function.
For CEC to function properly your TV must be in TV mode.
JVC 49' LED Smart 4K Ultra HD TV LT-49K870 Manual GB-GR.indd 45
buttons to select the
You can select a time that your TV menus will be displayed. If you select OFF the menu will
remain on the screen until you press a button to remove it.
OFF - 15 Sec - 30 Sec - 60 Sec.
• Select SOFTWARE UPGRADE then press OK. The Upgrade Options menu will appear.
• Press the to enable or disable AUTOMATIC SCANNING.
• To manually scan for an upgrade select SCAN FOR UPGRADE then press OK.
Select a time that you would like your TV to switch off if no buttons are pressed for a certain
amount of time.
OFF - 1 HOUR - 2 HOURS - 3 HOURS - 4 HOURS - 5 HOURS - 6 HOURS - 7 HOURS - 8 HOURS
Press the to select enable or disable store mode. Store mode will brighten the display.
Press the to select enable or disable audio video sharing.
Press the to select STANDBY or LAST STATE. If you choose LAST STATE, and switch your
TV off and back on again at the mains it will switch on at its last state. Its best to leave it as
STANDBY, otherwise your TV may switch on after a power cut.
Press the to select enable or disable virtual remote.
Press the to select enable or disable virtual remote.
Press the to select enable or disable virtual remote.
Press the to select TV or Amplifier. CEC has to be set to Enabel to access this setting.
Press OK to view the licencing information of your TV.
Other Information
7
45
18/10/2017 09:27