Table of Contents
Advertisement
Available languages
Available languages
Other Information
7
Other Settings
The Other Settings menu has more advanced setting that you can adjust, these are not everyday setting.
1. Press the MENU button and then press the
SETTINGS and then press the OK button. The SETTINGS menu will be
displayed.
2. Press the
Menu Timeout
Standby Led
Device Identification
Software upgrade
Auto TV OFF
Store Mode
Audio Video Sharing
Power Up Mode
Virtual Remote
CEC
CEC Auto Power On
Speaker
OSS
When in Smart or Media modes the CEC function will not function.
For CEC to function properly your TV must be in TV mode.
48
JVC 55' LED Smart 4K HDR TV LT-55K880(A) Manual GB GR.indd 48
buttons to select MORE and then press the OK button.
You can select a time that your TV menus will be displayed. If you select OFF the menu will
remain on the screen until you press a button to remove it.
OFF - 15 Sec - 30 Sec - 60 Sec.
You can switch the standby LED off using this setting.
You can switch Device Identification on or off.
• Select SOFTWARE UPGRADE then press OK. The Upgrade Options menu will appear.
• Press the
to enable or disable AUTOMATIC SCANNING.
• To manually scan for an upgrade select SCAN FOR UPGRADE then press OK.
Select a time that you would like your TV to switch off if no buttons are pressed for a certain
amount of time.
OFF - 1 HOUR - 2 HOURS - 3 HOURS - 4 HOURS - 5 HOURS - 6 HOURS - 7 HOURS - 8 HOURS
Press the
to select enable or disable store mode. Store mode will brighten the display.
Press the
to select enable or disable audio video sharing.
Press the
to select STANDBY or LAST STATE. If you choose LAST STATE, and switch your
TV off and back on again at the mains it will switch on at its last state. Its best to leave it as
STANDBY, otherwise your TV may switch on after a power cut.
Press the
to select enable or disable virtual remote.
Press the
to select enable or disable virtual remote.
Press the
to select enable or disable virtual remote.
Press the
to select TV or Amplifier. CEC has to be set to Enable to access this setting.
Press OK to view the licencing information of your TV.
buttons to select the
09/05/2018 08:34
Advertisement
Table of Contents
