General Information; Introduction - HP 41941A Manual

INTRODUCTION

1-1.
This operating note provides the information necessary to use the
HP
Probe Kit with the 4194A Impedance/Gain- Phase Analyzer. Refer to the 4194A's Opera­
ting Manual for specific 4194A operating procedures.
DESCRIPTION
1-2.
The 41941 A/B Impedance Probe Kits are accessories for the 4194A. The 41941 A has a
1.5m cable and the 41941 B
The 41941 A/B are usable only with 41 94As with
used with ROM Versions
The combination of the 41941 A/B probe with the
4194A's measurement capability as shown below.
Frequency range:
Grounded device:
de bias voltage:
de bias current:
SECTION 1

GENERAL INFORMATION

�
as a 3m cable. Figure 1 -1 shows the 41941 A and B.
Note
2.1 and below.
up to 100 MHz
can be measured
up to 1 50V (with an external power supply)
±
up to ±O.5A (with an external power supply)
Figure 1-1. Model 41941 A/B
HP
41941 A/B Impedance
ROM
Version 2.2 and cannot be
'IMP with Z
PROBE'
function expands the
1-1