Download Print this page
Draper RWB1 Instructions
Draper RWB1 Instructions

Draper RWB1 Instructions

Rotating beacons

Advertisement

Quick Links

1. INTRODUCTION
1.1 SCOPE
LED beacon, 63879, 63878 and 63880 are fully certified for use on
road vehicles
1.2 SPECIFICATION
Stock No. .........................63877
Part No. .......................... RWB1
Rated voltage ................... 12/V
Current .......................... 450mA
Bulb type ....................12V 22W
Non-road vehicles ONLY
Stock No. .........................63878
Part No. .......................... RWB2
Rated voltage ................ 12/24V
Current .......................... 450mA
Bulb type .............. H1 12V 55W
......................... or H1 24V 70W
Rating ................................ IP56
ECE65 Compliancy ............ Yes
*Note: Stock No.63877 is not suitable for use with on-road vehicles.
1.3 HANDLING & STORAGE
Although these beacons are small in size, care must still be taken when handling. Dropping
these beacons will damage them. These beacons are not toys and must be respected.
The environment will have a negative result on its operation if you are not careful. If the air
is damp, components will rust. If the machine is unprotected from dust and debris;
components will become clogged: And if not cleaned and maintained correctly or regularly
the machine will not perform at its best.
2. HEALTH & SAFETY INFORMATION
2.1 SAFETY PRECAUTIONS
Read this instruction leaflet fully before using the product.
Do not use the beacon for any other purpose other than for which it is designed for.
Do not allow children to operate the beacon.
Do not operate the beacon if any parts are missing or damaged as this may cause failure
or possible personal injury and may invalidate the product warranty.
When not in use switch the beacon off and where appropriate remove plug from power
supply.
ROTATING
BEACONS
63877/63878/63879/63880
INSTRUCTIONS
Stock No. .........................63879
Part No. .......................... RWB3
Rated voltage ................... 12/V
Current .......................... 450mA
Bulb type .............. H1 12V 55W
......................... or H1 24V 70W
Rating ................................ IP56
ECE65 Compliancy ........... YES
Stock No. .........................63880
Part No. .......................... RWB4
Rated voltage ................ 12/24V
Current .......................... 450mA
Bulb type .............. H1 12V 55W
......................... or H1 24V 70W
Rating ................................ IP56
ECE65 Compliancy ............ Yes
G

Advertisement

loading
Need help?

Need help?

Do you have a question about the RWB1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Draper RWB1

  • Page 1 LED beacon, 63879, 63878 and 63880 are fully certified for use on road vehicles 1.2 SPECIFICATION Stock No......63879 Stock No......63877 Part No......RWB3 Part No......RWB1 Rated voltage ....12/V Rated voltage ....12/V Current ......450mA Current ......450mA Bulb type ....H1 12V 55W Bulb type ....12V 22W...
  • Page 2 Helpline: + 44 ( 0 ) 23 8049 4344 Sales Desk: + 44 ( 0 ) 23 8049 4333 General Enquiries: + 44 ( 0 ) 23 8026 6355 internet: drapertools.com email: sales@drapertools.com Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. U.K Delta International BV, Oude Graaf 8, 6002 NL, Weert, Netherlands.

This manual is also suitable for:

Rwb3Rwb4Rwb2638776387863879 ... Show all