Maintenance And Cleaning - Tricity Bendix HG 211 Instruction Booklet

MAINTENANCE AND CLEANING
Before any maintenance or cleaning can be 3. The hob surface, pan support and burnes
carried out, you must DISCONNECT the heads can be cleaned using mild abrasive
appliance from the electricity supply. such as "Jif", but take care not to damage
the spark electrodes.
For hygiene and safety reasons, this
appliance should be kept clean at all times. A 4. The pan supports are dishwasher proof, if
build-up of fats or other foodstuffs could washing them by hand, take care when
result in a fire. Never line any part of the hob drying then as the enamelling process
with aluminium foil. occasionally leaves rough edges.
An unsuitable cleaning preparation can do more 5. The burner crowns can be removed for
harm than good, so it is important to note the cleaning. Wash these parts frequently in hot
following: soapy water. Stubborn staines can be
removed by soaking in hot water then
1. Spillage should be wiped up as it occurs but scouring them with a soap filled pad such as
care should be taken as the hob will be "Brillo". The burner crown may loose its matt
hot. Before doing any extensive cleaning surface after several cleanings but this is no
allow the hob to cool. way will impair its function.
2. The fascia panel and control knobs can be 6. Do not use any polishes, caustic cleaners,
cleaned using soapy water and a damp abrasives, washing soda, or soap powder,
cloth. Polish dry with a soft cloth. except as reccomended in this booklet.