Table of Contents
Advertisement
Problem
Vacuum bag loses
vacuum after
sealing
The device does
generate vacuum
in the vacuum
container
EN
8
Disposal
Electrical Appliance
Electrical appliances should be returned to designated collection points.
30 / 30
Possible Cause
The vacuum bag is
damaged
The vacuum bag was not
placed correctly on the
sealing strip
The connector hose is not
properly attached to the
vacuum container lid or to
the appliance coupling
intended for vacuum
containers.
The lock of the vacuum
container lid is not open
The vacuum container is
overfilled
Electric appliances are marked with this symbol. Electrical
appliances must be disposed of and recycled in a correct
and environmentally friendly manner. You must not dispose
of electric appliances with household waste. Disconnect the
appliance from the power supply and remove power cord
from the appliance.
Solution
Check the packing bag for any
signs of damage
Wrap the sharp edges of the
contents in a paper towel.
Make sure that the entire
vacuum bag is placed inside the
vacuum chamber during sealing
Properly attach the connector
hose to the lid and to the
coupling on the appliance
Open the lid lock
Leave at least 3 cm free from
the top of the container
Disposal
300748
Advertisement
Table of Contents
