Subscribe to Our Youtube Channel
Related Manuals for leisurecraft Canadian Timber The Polar Plunge Tub
Summary of Contents for leisurecraft Canadian Timber The Polar Plunge Tub
- Page 1 08/2023 The Polar Plunge Tub Installation Instructions Requirements: Adjustable Wrench Pipe Wrench Thread Tape Manufactured by: View the assembly process tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
- Page 2 You can put down a blanket or towel to protect the side of the tub. Unpack the hardware for the chiller (If Purchased) & drain assembly. Wrap 3 layers of thread tape around the threads on both ends of the short pipe. Manufactured by: tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
- Page 3 Wrap 3 layers of thread tape around the threads on both ends of the long pipe. Thread the long piece of pipe into the elbow. This can be hand tight only at this time. Manufactured by: tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
- Page 4 This will also tighten the long adapter into the elbow. Have the handle of the valve facing in your desired position when tight. Using a pipe wrench or adjustable wrench, tighten the garden hose connector (if ordered) onto the valve. Manufactured by: tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
- Page 5 This only needs to be hand tight at this time. Thread a quick connect onto each of the long pipes. Tighten completely with a wrench. Place the tub back in the proper position. Manufactured by: tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
- Page 6 Insert the filter into the holder and screw onto the chiller. Tighten with the provided filter tool. Remove the covers on the inlet and outlet on the back of the chiller. Install the inlet filter onto the inlet connection. Manufactured by: tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
- Page 7 Connect the other ends of the chiller hoses to the tub. The hose from the outlet of the chiller will connect to the higher pipe of the tub and the hose from the inlet will connect to the lower pipe. Manufactured by: tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
- Page 8 Place a locking clasp onto one of the straps and pull it snug. Once in desired position, remove the strap and secure the clasp with 2 – 1 ½” (38mm) screws. Repeat the above process for the remaining 3 straps. Manufactured by: tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
- Page 9 To open the cover, unclasp the straps and roll up the cover to sit on the cover supports. Ensure the drain valve is closed, fill the tub with water and enjoy! Manufactured by: tel: 888-923-9813 | info@leisurecraft.com| web: www.leisurecraft.com...
-
Page 10: Warranty
This warranty is a parts only warranty and any service or labor costs would not be considered as part of the 3-year warranty. Dundalk LeisureCraft Inc. warrants our Cold Plunge Chiller against defects in materials and workmanship under normal/residential use for a period of one (1) year, as applicable, from the date of receipt of the product by the original end-user consumer.
Need help?
Do you have a question about the Canadian Timber The Polar Plunge Tub and is the answer not in the manual?
Questions and answers