Controls And Their Use - Pioneer GM-H100 Owner's Manual

Controls and their Use
Power
—Adjustment screwdriver {supplied}
¥. Bass Freq. V. Bass Level
AOH2 @ 120Hz
(eX
ods @ 1208
RCA Level
fo N
2v @ 200mv
@ Power indicator
The power indicator lights when the power is switched on.
@ Variable Bass Frequency Control
Adjusting the variable bass frequency control § the boostable
bass frequency of the amplifier. You can select a frequency in the
range 40 to 120 Hz. Adjust the boostable bass frequency ta suit the
speakers or the music.
® Variable Bass Level Control
Adjusting the variable bass level control changes the |
boostable bass frequency set by control @
« ff you do not want to boost the bass. turn the control fully counterclockwise
to 0 dB.
@ RCA Input Level Control
lf the output is low even when the volume of the car stereo is
turned up, turn this control clockwise. If there is distortion when the
volume of the car stereo is turned up, turn this control counterclockwise.
+ Adjust controls @. @, and @ with the supplied adjustment sc river
eep the screwdriver in case you need to readjust the controls later.
2 in low-trequeri unds may be noticeable whan the 40-to
120-Hz frequency level is adjusted if the program
components in the 40-to-120-Hz range or if smalldis
used,