Advertisement
Quick Links
PVA-1500HE2/PVA-
1500T2/SolSensor-
300V3
Solmetric I-V Curve Tracer Kit
Getting Started Guide
Introduction
This document gives brief instructions and troubleshooting
information for the PV-1500HE2 and PV1500T2 Solmetric
I-V Curve Tracers (I-V Curve Tracer) and SolSensor-300V3
(SolSensor). For complete use information, see the Users
Manual.
Contact Fluke
Fluke Corporation operates worldwide. For local contact
information, go to our website: www.fluke.com.
To register your product, or to view, print, or download the
latest manual or manual supplement, go to our website.
+1-425-446-5500
fluke-info@fluke.com
Safety Information
General Safety Information is in the printed Safety
Information document that ships with the I-V Curve Tracer
and at www.fluke.com. More specific safety information is
listed where applicable.
A Warning identifies hazardous conditions and procedures
that are dangerous to the user. A Caution identifies
conditions and procedures that can cause damage to the
Product or the equipment under test.
*5597386*
PN 5597386 (English)
2/2024
©2024 Fluke Corporation. All rights reserved. Specifications are
subject to change without notice. All Product names are
trademarks of their respective companies.
Advertisement
Related Manuals for Fluke PVA-1500 Series
Summary of Contents for Fluke PVA-1500 Series
- Page 1 Safety Information General Safety Information is in the printed Safety Information document that ships with the I-V Curve Tracer and at www.fluke.com. More specific safety information is listed where applicable. A Warning identifies hazardous conditions and procedures that are dangerous to the user. A Caution identifies conditions and procedures that can cause damage to the Product or the equipment under test.
- Page 2 Specifications Complete Product specifications are available at www.fluke.com. Safety specifications are in the Safety Information that shipped with the product. Caution To avoid damage to the Product: Use only the test leads and alligator clips provided with the Product.
- Page 3 Measurement Example - Test Strings at a Fused Combiner Box 1. Turn on the I-V Curve Tracer and SolSensor. Blinking LEDs indicate searching for PC Software. 2. Connect your PC to the I-V Curve Tracer Wi-Fi hot spot. 3. Start the PVA software. 4.
- Page 4 Disabled charge the battery. Remove lens cap. Confirm Project settings Zero irradiance in Properties>Site Info... (latitude/ reading longitude, date/time, tracking, azimuth). For more troubleshooting information, see the Users Manual and the poster that shipped with the Product. Software updates: www.Fluke.com.
Need help?
Do you have a question about the PVA-1500 Series and is the answer not in the manual?
Questions and answers