Airflow Direction Control (Invalid For Some Models); Room Temp - LG MW121C4 NHM0 Owner's Manual

Airflow Direction Control (invalid for
some models) a
Airflow Direction Control
Vertical airflow(Horizontal airflow) is automatically adjusted to a
certain angle in accordance with the operation mode after turning on
the unit.
The direction of airflow can be also adjusted to your own requirement
by pressing the
SWING SWING
NOTE
• Heating mode is only available for heat pump models.
Vertical Airflow Control (with the remote controller)
Using remote controller to set various angles of flow or specific
angle as you like.
Swinging Airflow
Pressing " Swing" button once, the vertical adjustment louver will
swing up and down automatically.
Desired Direction Airflow
Swing" button again when the louvers swing to a
Pressing the "
suitable angle as desired.
Horizontal Airflow Control (with the remote controller)
Using remote controller to set various angles of flow or specific angle as you like.
Swinging Airflow
Pressing " Swing" button once, the horizontal adjustment louver will swing left and right automatically.
Desired direction airflow
Pressing the " Swing" button again when the louvers swing to a suitable angle as desired.
NOTE
• If the unit doesn't have four ways airflow function,you can adjust horizontal airflow by yourself. (invalid
for some models)
− Do not turn the vertical adjustment louvers manually, otherwise malfunction may occur. If that
happens, turn off the unit first and cut off the power supply, then restore power supply again.
− It is better not to let the vertical adjustment louver tilt downward for a long time at Cooling or Dry mode
to prevent condensed water from dripping.
Room Temp b
Room temperature is displayed on the remote controller for about 5 seconds if you press Room Temp
button.
16
button of the remote controller.
Dual Light
Sensing Off
Fan
Mode
Speed
Temp.
Jet
Smart
Mode
Room
Temp
Swing Swing
Clock Sleep
Timer Timer
On Off
EN