Yep Components PODIO+ Quick Start Manual

quick start manual
Scan the QR code or visit:
www.yepcomponents.com/support
to access more information about maintenance,
latest service manuals and videos.
MAINTENANCE
To ensure your seatpost is working smoothly and serves you well
for a long time, you need to maintain it properly and regularly.
We've made the service procedures as easy as possible to make sure
you spend more time on the trails.
Scan the QR code or visit:
www.yepcomponents.com/support
to access more information about maintenance,
latest service manuals and videos.
USING POWER WASHERS
Use only low pressures to avoid dirt getting in. Do not overuse a power washer
in general, as this might trap water in your other components too.
If you notice your seatpost action slowing down, use a little bit of teflon lube on
the seal lip, cycle the post up and down a few times and wipe off the lube.
CLEANING DIRT FROM THE SEAL: after every ride.
Keep your seatpost clean. Use a little bit of suspension oil around the seal lip
and cycle the seatpost up and down a few times. Wipe off the dirt and oil from
the stanchion and from the seal.
If you notice your seatpost action slowing down, use a little bit of teflon lube on
the seal lip, cycle the post up and down a few times and wipe off the lube.
OCCASIONAL BLEEDING: when needed.
We've designed the system to require as little attention as possible, but just as
with any other hydraulic components, you need to bleed it from time to time
(usually when it develops sag). The procedure is very easy. It takes only a few
minutes and can be performed at home. You don't need to send your seatpost
away for service. You do not even need to remove the seatpost from your bike.
Use our bleed kit provided in the box - otherwise no special tools are needed.
Use videos on www.yepcomponents.com/support.
Our bleed procedure, even though it's very quick, lasts much longer
than similar solutions used on competition posts, that usually are
just a temporary fix and need to be reptated often.
FULL SERVICE: once per year and after every 300 hours
Take the seatpost apart, clean and lubricate. More often if you ride in very
muddy conditions or use power washers excessively.
Use videos on www.yepcomponents.com/support.
Attention: Full service performed at a certified Yep Components Service Centers
is required after 1 year from the date of purchase to maintain the warranty for
the following, second year. An updated list of our Dealers and Service Centers
can be found on our website: www.yepcomponents.com.
Visit: www.yepcomponents.com/warranty
to find out more about warranty on this product.