Advertisement
D Series
Vario Wave Maker
USER'S MANUAL
WARNING:
1. To ensure performance, do not let the pump work dry.
2. Keep the controller at a dry place. Avoid water splashing on it.
3. Be careful when assembling the magnet base. Move parallel the
magnet base parallel the pad close to the outside wall of fish tank to
prevent breaking the fish tank.
4. Do not disassemble the controller or adaptor without professional
guidance.
5. The product and APP will be changed with the progress of
technology. Please refer to the actual product and APP.
6. After the device is powered off, please use phone to connect to
ensure that the timing mode operates accurately.
7. When using it for the first time or not using it for a long time, it needs to
be used continuously for more than one hour to ensure that the internal
clock battery is charged.
8. App does not support traditional Chinese.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Jecod D Series
Summary of Contents for Jecod D Series
- Page 1 D Series Vario Wave Maker USER’S MANUAL WARNING: 1. To ensure performance, do not let the pump work dry. 2. Keep the controller at a dry place. Avoid water splashing on it. 3. Be careful when assembling the magnet base. Move parallel the magnet base parallel the pad close to the outside wall of fish tank to prevent breaking the fish tank.
-
Page 2: Function Feature
Vario Wave Maker I. Introduction Jecod D Series Wave Makers are well designed as a good equipment stimulate natural environment by high technology, which offers a natural environment for different sea livings in the fish tank or in the pond. Before assembling and operating correctly, please read the manual carefully. -
Page 3: Product Specification
4. Controller install, there is a hole to hang on the controller at any place in convenient. 5. Connect the pump with the 3-pin connection wire. Connect the adaptor plug with the controller and connect AC wire adaptor. D Series... -
Page 4: Operation And Function
Clock ： Program icon Hour Minutes Bluetooth icon Clock icon Master icon Lock icon Mode icon Slave icon Power Bluetooth Feeding button Gear adjustment Gear ON/OFF Mode button Frequency DWP-9 Vario DC Wave Maker D Series... -
Page 5: Function Description
The flow rate varies from 30% to 100% as a sine curve. Long press “MODE/FREQ”to adjust frequency. M3: Constant Wave Mode One or more pumps can make constant flow at the same time. Flow rate can be adjusted by "▲” and “▼". D Series... - Page 6 Aqua” in either APP Store or Google Play to download the application. Alternately user can scan the below QR-code on the package or user’s manual to download the application. (Note: Scan function in certain countries or areas may not be D Series...
- Page 7 ① Turn on the Bluetooth on the phone, and connect the controller to the power supply. ②Tap "Add Bluetooth device" or "+" in the upper right corner to add it, and wait for the search. When the corresponding D Series...
-
Page 8: Pump Control
Tap the Bluetooth icon on 5.4. Pump Control Pump switch Current flow Long press the icon for 2 seconds Mode setting Wave model In Devices interface, long press the device icon for 2 seconds to enter the device control interface. D Series... -
Page 9: Manual Mode Settings
The minimum flow is 30%. The minimum frequency is 5%. Pulse or circulation can be chosen. Sine Wave Mode: Press or drag the bar to adjust the flow and the frequency. The minimum flow is 30%. The minimum frequency is 5%. D Series... - Page 10 Random wave data generated by the system randomly. Switch to random wave making to use. Constant Wave Mode: Press or drag the bar to adjust the flow. The minimum flow is 30%. Random wave mode constant wave mode D Series...
-
Page 11: Feed Mode
In the device control interface, press the Timer icon of mode setting for 2 seconds to enter the Timer setting. Time period switch button Adjust the time slider Start time End time Click into wave making mode selection and parameter setting D Series... - Page 12 ②Choose the plan period of work mode. ③Drag the slider to adjust start and end time or modify start and end time directly. ④Click finish to save plan setting. ⑤Clicking delete will delete the current scheduled period. D Series...
- Page 13 When set the function, only adjust the main control function, the slave control function is determined by the main control. The main control has timing and manual functions, and the settings are the same as timing and manual settings. D Series...
- Page 14 Vario Wave Maker Main control function Settings: Manual setting page Timing setting page Slave control function Settings: D Series...
- Page 15 "Settings" on the grouping page to enter the grouping control page. The operation is the same as that of single wave maker control. To add and delete devices in a group, tap the small ” ” in the upper right corner. D Series...
-
Page 16: Pump Management
(tap the “set time”). Set Time 2. Users can also change the name of the device to facilitate management. And delete device. D Series... - Page 17 Error Fault description Trouble Shooting Message Abnormal current. Check whether Controller over-current ER01 the pump is short circuit or controller is malfunction. Check whether the controller is Controller overheats ER02 exposed to the sun or under high temperature D Series...
- Page 18 4. Use soft cloth to rub blade and clean the dirty in the pump. 5. This product is indoor use only, don’t submerged in the water to cause unnecessary loss. D Series...
- Page 19 This product has to be disposed at an authorized place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help save natural resources, and make sure the product is disposed in an environmental friendly and healthy way. D Series...
- Page 20 Jebao Co.,Ltd. Add: Tongmao Industrial Park, Xiaolan Town, Zhongshan, Guangdong, China. Tel: +86-760-28136708, 28136720 Email: info@jebao.com CS@jebao.com Website: http://www.jebao.com...
Need help?
Do you have a question about the D Series and is the answer not in the manual?
Questions and answers