Weekly Timer Operation - Hitachi RAR-M0B6 Manual

WEEKLY TIMER OPERATION

• It is possible to select Mode A or Mode B. For each mode, up to 6 programs can be set per day. In total, a
maximum of 42 programs can be set for a week for each mode.
• If calendar and clock are not set, the reservation setting for Weekly Timer cannot be set.
• If calendar and clock are not set correctly, Weekly Timer will not operate correctly.
• Reservation for calendar and clock shall be set fi rst before operating Weekly Timer.
Step 1 : Set the reservation schedule to the remote controller. Send the registered reservation to indoor
unit and then operate.
Step 2 : Select Mode A or Mode B and activate or deactivate Weekly Timer .
Step 3 : Copy and cancel the reservation schedule.
Step 1 : Set reservation schedule to the remote controller. Send the registered
reservation to indoor unit and then operate.
■ How to set a Weekly Timer.
1. Select Mode A or Mode B
1
Press (Weekly) button. Weekly lights up.
display. (Mode A is selected).
2
Press (WEEKLY) button again,
(Mode B is selected).
• If no reservation has been made, ON/OFF,
• If reservation has been made, ON/OFF,
appear.
2. Set a program
Press (Weekly) button for about 3 seconds. The selection mode
can be changed.
, day: Mon, program no. : 1, ON/OFF, setting time and setting
temperature blink on the display.
3. Select the desired day of the week
Press (DAY) button.
The day changes from Mon
3
Mon, Tue, Wed, Thu, Fri, Sat, Sun [Full days]
Fri [weekday] Sat, Sun [weekend]
Select [Full days] for daily reservation.
Select [weekday] for Monday to Friday reservation.
Select [weekend] for Saturday and Sunday reservation.
After reservation has been set, it is easy to check and edit at the same
time.
4. Press button to select a program number.
The number changes from 1
If program number has been set, follow above in order to make
4
changes.
- 22 -
and
and blink on the display.
,
,
Tue Wed Thu Fri
Mon, Tue, Wed, Thu,
Mon Tue ......
2 3 4 5 6
blink on the
appear.
F
will not
F
Sat Sun
1 2 .....