Smeg SWM812ES User Manual page 30

FAILURE CODE
E02
E03
E04
(*) See the section regarding the maintenance and cleaning of your machine.
FAILURE PROBABLE
INDICATOR FAILURE
The water
level in your
machine is
The 1 avd 3 below heater.
number light The pressure
of your water
blinks.
supply may
be low or
locking.
The pump
The 1 and 4
has failed or
number light
the pump filter
blinks .
is obstructed.
There is an
The 2 and 3 excessive
number light amount of
blinks. water in your
machine.
29
THE PROCESS
TO BE DONE
Turn on the tap
to the end.Water
may be cut,
check it.If the
problem is still
continuing,your
machine will
automatically
stop after a
while.Unplug
your machine,
turn off the tap
and apply to the
nearest
authorized
service.
Clean the pump
filter.If the
problem
persists,apply to
the nearest
authorized
service.(*)
Your machine
will automatically
drain the water.
After your
machine has
completed the
draining
process,shut
down your
machine and
unplug. Close
the tap and
apply to the
nearest
authorized
service.