IMPORTANT PLEASE READ All products manufactured and supplied by BAGNODESIGN are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation.
Page 4
47-77 Ø52 G 1 2 " 77-47 33-63 Install the concealed part into the wall and connect the water supply (if possible pressure test).
Page 5
Install and tighten the shroud and back plate to the threaded part, being careful not to over tighten. Fix the handle knob on the valve body. Secure the knob by tightnening the grub screw. Turn on the water and test the valve.