Download Print this page

Advertisement

Quick Links

Lumos™ 5G FWA Antenna
Installation Instructions
Airgain, Inc
Updated: April 2024
Airgain, Inc. 2024. All Rights Reserved.
Airgain, Inc provides this documentation in support of its products for the internal use of its
current and prospective customers. The publication of this document does not create any
other right or license in any party to use and content in or referred to in this document and
any modification or redistribution of this document is not permitted.
While efforts are made to ensure accuracy, typographical and other errors may exist in
this document. Airgain, Inc reserves the right to modify or discontinue its products and to
modify this and any other product documentation at any time.
All Airgain, Inc products are sold subject to its published Terms and Conditions, subject
to any separate terms agreed with its customers. No warranty of any type is extended by
publication of this documentation, including, but not limited to, implied warranties or
merchantability, fitness for a particular purpose and non-infringement.
Airgain, Inc. is a registered trademark. Inc. All trademarks, service marks and similar
designations referenced in this document are the property of their respective owners.
Airgain, Inc. All Rights Reserved.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Lumos 5G FWA and is the answer not in the manual?

Questions and answers

Summary of Contents for Airgain Lumos 5G FWA

  • Page 1 Updated: April 2024 Airgain, Inc. 2024. All Rights Reserved. Airgain, Inc provides this documentation in support of its products for the internal use of its current and prospective customers. The publication of this document does not create any other right or license in any party to use and content in or referred to in this document and any modification or redistribution of this document is not permitted.
  • Page 2 MAINTAIN A SAFE DISTANCE. Stay 8 in (20 cm) or more away from the Lumos antenna during normal operation. • AVOID POWER LINES. Do not install the Lumos antenna within 23 ft (7 m) of power lines. Airgain, Inc. All Rights Reserved.
  • Page 3: Table Of Contents

    Table of Contents Overview Tools Required Prior to Installation Installation Contact Information Airgain, Inc. All Rights Reserved.
  • Page 4: Overview

    Flexible cable clips or vinyl siding clips for routing cables • Coaxial surge protection with SMA female to male connectors (if mounting outdoors) • AC extension cord (if needed for testing different locations with CPE) Airgain, Inc. All Rights Reserved.
  • Page 5: Prior To Installation

    Verify all contents are included in the box. The box should include: • The Lumos 5G FWA antenna. • Figure 1. Dimensions of Lumos 5G FWA antenna • Adhesive heat shrink for sealing around the connectors • Multi-use mounting bracket assembly consisting of: •...
  • Page 6 Description Quantity Bracket Assembly Mast-Mount Bracket Flange Tension Clamp M8 x 140mm Long Hex Head Bolt M8 Flat Washer M8 Spring Lock Washer M8 Nut M6 x 20mm Long Hex Head Bolt M6 Flat Washer Airgain, Inc. All Rights Reserved.
  • Page 7 At least 18 in (46 cm) away from other antennas • At least 39 in (100 cm) away from any electrical light, electrical panel, or electrical plug • At least 79 in (200 cm) above ground level and out of reach of children Airgain, Inc. All Rights Reserved.
  • Page 8: Installation

    Torque each M8 bolt to 10 Nm (88 in-lbs) • Avoid overtightening as this may damage or distort the mast tube section • Mast should not exceed 5 in (12.7 cm) diameter Figure 4. Assembly for mounting to a mast with M8 bolts Airgain, Inc. All Rights Reserved.
  • Page 9 Secure rear bracket to the wall with appropriate M8 or 5/16” diameter screws • Fitting the Lumos antenna • Ensure the bracket assembly is securely fixed and the EZConnect cable harness is installed before fitting the Lumos antenna Airgain, Inc. All Rights Reserved.
  • Page 10 Both joints can be adjusted 5° for each tooth, not to exceed a total of 40° in either direction • Torque each M8 inner joint bolt to 20 Nm (15 ft-lbs) Figure 6. Horizontal and vertical angle adjustments Airgain, Inc. All Rights Reserved.
  • Page 11: Contact Information

    • This would require an additional EZConnect cable harness for installing the surge protection between the outdoor and indoor cables 5. Contact Information For any questions, please contact Airgain Support: support@airgain.com Airgain, Inc. All Rights Reserved.