Smeg SWM107E User Manual page 43

CHAPTER -10: TROUBLESHOOTING
FAULT
Unsatisfactory
washing result.
As soon as the
machine is loaded
with water, water
discharges.
No water appears in
the drum during
washing.
Laundries have
detergent residues on
them.
Grey spots appear on
the laundries.
(**) See the chapter regarding installation of your machine.
POSSIBLE CAUSE
Water being hard.
(Dirty, hard, etc.)
Laundries distributed
in your machine non-
homogenously.
The end of water
discharging hose is
too low for the
machine.
No fault. Water in the
non-visible part of the
drum.
Non-dissolving
particles of some
detergents may
adhere to your
laundries as white
spots.
The reason for this
spots may be oil,
cream or ointment.
43
REMOVING
METHODS
Adjust the amount of
detergent based on
the instruction of
detergent
manufacturer.
Spread your laundries
in the machine
properly and
homogeneously.
Set the water
discharging hose on
appropriate height.
(**)
-
Perform an extra
rinsing by setting your
machine to "Rinsing"
programme, or clean
the spots using a
brush after your
laundries dries.
Apply the maximum
amount of detergent
instructed by the
detergent
manufacturer in the
next washing
operation.