Smeg SWM107E User Manual page 15

CHAPTER-4: PRELIMINARY PREPARATION FOR
LAUNDERING ADDING DETERGENT INTO MACHINE
The amount of detergent you will put in your machine will depend on
the following criteria:
Your detergent utilization will be based on the degree of
contamination of your laundries. Do not prewash your less stained
laundries and put your slight amount of detergent in the 2
compartment of the detergent drawer.
For your much stained laundries, select a programme including
prewashing, and put ¼ of the detergent you will put in the
detergent drawer in the 1
while putting the remaining ¾ of it into 2
Use detergents produced for automatic washing machine in your
machine. The amount of detergent you will use for your laundries
is printed on the detergent package.
The higher the degree of hardness of the water the more detergent
you will use.
The amount of the detergent you will use will increase as the
amount of your laundries increase.
Put the softener in the softener compartment in the detergent
drawer. Do not exceed the MAX level. Otherwise, softener will flow
into washing water through flushing.
Softeners with high density are required to be thinned to a degree
before being put in the drawer. Because high-density softener will
clog the flush and avoid the flow of the softener.
You can use your liquid detergents in all programs without
prewashing. For this, fit liquid detergent level plate in the
accessories bag into 2
set the amount of liquid detergent according to the levels on this
plate. Remember to detach the liquid detergent plate.
st
compartment of the detergent drawer
nd
nd
compartment of the detergent drawer and
15
nd
compartment.