Description Of The Controls - Smeg ST112-2 Instruction Manual

User instructions

3. Description of the controls

3.1 Upper panel
All the dishwasher controls are grouped on the upper panel. Switch-on,
programming, switch-off etc. procedures are only possible when the door
is open.
ON/OFF BUTTON
1
Pressing this button energises the appliance.
SELECTED PROGRAM INDICATOR LIGHTS
2 Illumination of this light denotes the program selected and the
occurrence of a fault (troubleshooting).
PROGRAM SELECTION BUTTON
3 By pressing this button in sequence it is possible to select the
desired program.
SALT WARNING LIGHT (on some models only)
4
Illumination of this light signals that salt container is empty.
RINSE AID WARNING LIGHT (on some models only)
5
Illumination of this light signals that rinse aid dispenser is empty.
DELAYED START BUTTON (on some models only)
6 Pressing this button in sequence delays the start of the program by
3, 6 or 9 hours.
DELAYED START LIGHTS (on some models only)
7 Illuminate to show that start delayed by 3, 6 or 9 hours has been
set.
9