Advertisement
Quick Links
Advertisement
Related Manuals for Hydrofarm PHOTOBIO MX2
Summary of Contents for Hydrofarm PHOTOBIO MX2
- Page 1 USER MANUAL PHOTOBIO•MX2...
-
Page 2: Parts List
1906 μmol/s PBAR S4 SPECTRUM Normalized Photon Output 1870 μmol/s PPF USER MANUAL 2.75 μmol/joule 100% iLOC Integrated Light Output Control allows OVERVIEW manual adjustment of light output SPECTRA • 1906 μmol/s PBAR Settings are 40%-55%-70%-85%-100%-PX Control S4 SPECTRUM S4 SPECTRUM •... - Page 3 F: T dimming cable (x1) G: Hanger (x4) USER MANUAL ILOC INTEGRATED LIGHT OUTPUT CONTROL Important: Caution: There are 2 types of thumb screws. Part C is longer, There are 2 type of thumb screw, Part C is longer one and use for for use with the hinge fastener.
- Page 4 USER MANUAL WARNING – POSSIBLE RISK OF INJURY TO EYES AND SKIN Hazardous optical UV, HEV, and IR radiation may be emitted from the light source. Always wear personal protective equipment ensuring complete shielding of skin and eyes. Avoid prolonged exposure and looking directly at light source.
-
Page 5: Installation
USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL INSTALLATION INSTALLATION Before you start the installation, make sure to address the following: This fixture installation requires Before you start the installation, make sure to address the following: This fixture installation INSTALLATION 2 people, a flat, clean and soft surface of at least 4' x 4' (e.g.: blanket, foam...etc). - Page 6 USER MANUAL USER MANUAL Step 3 USER MANUAL Step 3 identify driver connection carefully, as Fig.5 identify driver connection carefully, as Fig.5 Step 3. Identify driver connection carefully (Fig. 5). Driver slots Driver fastener hole Driver slots Driver fastener hole Dimming connector AC Input power (covered with a cap)
- Page 7 USER MANUAL USER MANUAL USER MANUAL c.As Fig. 7, slide the driver in the direction of the arrow marking Step 4, continued slide the driver in the direction of the arrow marking c. Slide the driver in the direction of the arrow marking (Fig. 7). Fig.
- Page 8 tep 5. onnecting driver to light fixture. ug in both DC cables of LED light panels to driver's DC side, see Fig. 9. Spin the orange cap till USER MANUAL ght. Make sure each cable plugs into its adjacent connector Step 5.
- Page 9 USER MANUAL Step 6. Mounting the fixtures. IMPORTANT: To ensure best results, always orient the fixture with the logo on the end caps facing the aisle. This will ensure greater uniformity. Suspended mounting, see Fig. 10. Use 4 rope ratchets to connect to all 4 lancet openings as shown in Figure 10. USER MANUAL USER MANUAL ensure best results, always orient the fixture with the logo on the end caps...
- Page 10 USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL Step 7. Power Connection tep 7 Power connection Step 7 Power connection Connect the power cable harness with the driver AC connector as shown in Fig. 12. Connect the power cable harness with the driver AC connector as shown in Fig. 12. Connect the power cable harness with the driver AC connector as shown in Fig.
- Page 11 USER MANUAL USER MANUAL 10 www.phantombio.com...
-
Page 12: Limited Warranty
Hydrofarm will, at our discretion, repair or replace PHOTOBIO•MX2 covered under this warranty if it is returned to the original place of purchase. To request warranty service, please return PHOTOBIO•MX2, with original sales receipt and original packaging to your place of purchase.
Need help?
Do you have a question about the PHOTOBIO MX2 and is the answer not in the manual?
Questions and answers