Operating Together With Tv Via Hdmi - JVC GZ-HM200BAG Instructions Manual

NOTE
When the video was recorded with
x.v.Colour™ set to [ON], change the
x.v.Colour™ setting on TV. For details, refer to
the TV's instruction manual.

Operating Together with TV via HDMI

Connecting the camcorder to an HDMI-CEC*-
enabled TV using the HDMI cable allows you
to utilize the following convenient functions.
* HDMI-CEC (Consumer Electronics Control)
is an industry standard that enables
interoperability between HDMI-CEC
compliant devices that are connected via
HDMI cables.
NOTE
• Not all HDMI-control devices comply with
the HDMI-CEC standard. The HDMI control
function of the camcorder will not work when
connected to these devices.
• The camcorder is not guaranteed to operate
with all HDMI-CEC-enabled devices.
• HDMI-CEC does not function immediately
after inserting the AC adapter to the AC
outlet. Open the LCD monitor to turn on the
camcorder.
Preparation:
• Connect an HDMI cable between the
camcorder and the TV. (Z p. 30)
• Turn on the TV and set the HDMI-CEC
related setting to on. (For details, refer to the
instruction manual of the TV.)
• Turn on the camcorder and set [HDMI
CONTROL] to [ON] from the MENU.
Playback on TV

Select the
playback mode.
Switching off TV and Camcorder

Turn off the TV.
Switching Display Language

Depending on the TV connected, the display
language of the camcorder will automatically
switch to the language that is used for the TV
when the camcorder is turned on.
(This is applicable only if the camcorder
supports the language selected for the TV.)
To use the camcorder with a language that
differs from the display language of the TV, set
[HDMI CONTROL] to [OFF] from the MENU.
NOTE
•
The display language of the TV will not
switch automatically, even if the display
language of the camcorder is changed.
•
These functions may not work correctly
when devices such as amplifier and selector
are connected. Set [HDMI CONTROL] to
[OFF] from the MENU.
•
If HDMI-CEC does not work properly, turn
off and on the camcorder again.
The TV
automatically
switches to the
HDMI input. (Turn on
the TV beforehand.)
The camcorder turns
off automatically.
1