Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Falcon Manuals
  4. Griddle
  5. Dominator Plus E3441
  6. Installation and servicing instruction

Falcon DOMINATOR PLUS E3441 Installation And Servicing Instruction

Griddle plates
Hide thumbs Also See for DOMINATOR PLUS E3441:

Advertisement

Quick Links

Download this manual
DOMINATOR
E3441, E3441R, E3481, E3481R
GRIDDLE PLATES
INSTALLATION and
SERVICING INSTRUCTIONS
CAUTION - READ THESE INSTRUCTIONS BEFORE INSTALLING, COMMISSIONING OR USING
THIS APPLIANCE!
The installer must ensure that the installation of the appliance is in conformity with these instructions
and National Regulations in force at the time of installation. Particular attention MUST be paid to:
BS7671 IEE Wiring Regulations
Electricity at Work Regulations
Health And Safety At Work Act
Fire Precautions Act
This appliance has been UKCA/CE marked based on compliance with the relevant Electrical and Electromagnetic
Compatibility (EMC) Regulations/Directives for the voltages stated on the data plate.
WARNING
THIS APPLIANCE MUST BE EARTHED.
:
On completion of the installation, these instructions should be left with the Engineer-in-Charge for
reference during servicing. Further to this, The Users Instructions should be handed over to the User,
having had a demonstration of the operation and cleaning of the appliance.
IT IS MOST IMPORTANT THAT THESE INSTRUCTIONS BE CONSULTED BEFORE INSTALLING
AND COMMISSIONING THIS APPLIANCE. FAILURE TO COMPLY WITH THE SPECIFIED
PROCEDURES MAY RESULT IN DAMAGE OR THE NEED FOR A SERVICE CALL.
PREVENTATIVE MAINTENANCE CONTRACT
To obtain maximum performance from this unit regular servicing of the appliance should be undertaken to ensure
correct operation, it is functioning as intended, and safe to use. We recommend servicing in accordance with SFG20
Maintenance Schedules and as a minimum, after 2,500 hours of use, or annually, whichever comes
maintenance contract be arranged with an appointed service contact. Visits may then be made at agreed intervals
to carry out adjustments and repairs.
WEEE Directive Registration No. WEE/DC0059TT/PRO
At end of unit life, dispose of appliance and any replacement
parts in a safe manner, via a licenced waste handler.
Units are designed to be dismantled easily and recycling of all
material is encouraged whenever practicable.
Falcon Foodservice Equipment
Wallace View, Hillfoots Road, Stirling,
FK9 5PY, Scotland
Phone 01786 455 200
PLUS
first and
that a
T100825 Ref. 12

Advertisement

loading

Related Manuals for Falcon DOMINATOR PLUS E3441

Summary of Contents for Falcon DOMINATOR PLUS E3441

  • Page 1 Units are designed to be dismantled easily and recycling of all material is encouraged whenever practicable. Falcon Foodservice Equipment Wallace View, Hillfoots Road, Stirling, T100825 Ref. 12 FK9 5PY, Scotland...
  • Page 2 IMPORTANT INFORMATION ELECTRICAL SAFETY AND ADVICE REGARDING SUPPLEMENTARY ELECTRICAL PROTECTION Commercial kitchens and foodservice areas are environments where electrical appliances may be located close to liquids, or operate in and around damp conditions or where restricted movement for installation and service is evident. The installation and periodic inspection of the appliance should only be undertaken by a qualified, skilled and competent electrician;...

  • Page 3: Section 1 - Installation

    SECTION 1 - INSTALLATION UNLESS OTHERWISE STATED, PARTS WHICH HAVE BEEN PROTECTED BY THE MANUFACTURER ARE NOT TO BE ADJUSTED BY THE INSTALLER. 1.1 MODEL NUMBERS, NETT WEIGHTS and DIMENSIONS Width Depth Height Weight Model (mm) (mm) (mm) (kg) E3441 E3441R E3481 E3481R...
  • Page 4 1.4 ELECTRICAL RATINGS Electrical loading is as stated in table below and also on appliance data plate. The location of mains isolating switch should be identified for use in any event of an emergency or during cleaning. 1.4.1 E3441/E3441R Connection Amps (A) 14.97 1.4.2 E3481/E3481R...

  • Page 5: Section 2 - Assembly And Commissioning

    SECTION 2 - ASSEMBLY and COMMISSIONING Note The following information should be read as applicable to the unit being assembled. 2.1 ASSEMBLY a) Position unit. Level it using feet adjusters. To mount unit upon a purpose built stand, refer to details supplied with stand.

  • Page 6: Section 3 - Servicing And Maintenance

    1. Model number – found on data plate 2. Serial number – found on data plate 3. Brief description of the issue To contact Falcon for a warranty issue dial (UK only) 01786 455 200 and select Warranty Issues from the menu. ELECTRICAL MAINTENANCE WARNING: BEFORE ATTEMPTING ANY MAINTENANCE, ISOLATE APPLIANCE AT MAIN SWITCH AND TAKE STEPS TO ENSURE THAT IT IS NOT INADVERTENTLY SWITCHED ON.
  • Page 7 3.1 CONTROL PANEL - To Remove a) To gain access to terminals, remove control panel and proceed as follows: b) Remove fat drawer. Undo and remove upper fixings. c) Undo fixings below control panel. Remove panel carefully and set aside. 3.2 THERMOSTAT - To Replace Remove control panel as detailed in Section 3.1.

  • Page 8: Section 4 - Spares And Accessories

    THERMOSTAT CAPILLARY TUBE PHIAL POSITION PHIAL CLAMP PLATE ELEMENT ELEMENT CLAMP PLATE Figure 2. SECTION 4 - SPARES and ACCESSORIES When ordering spare parts, always quote appliance type and serial number. This information will be found on data plate. Short list of spares Thermostat, Element, Contactor. Red neon, Amber neon, Control knob, Griddle plate, Fat drawer.
  • Page 9 E3441/E3441R WIRE DIAGRAM...
  • Page 10 E3441/E3441R CIRCUIT DIAGRAM E3481/E3481R WIRING DIAGRAM 2N~ E3481/E3481R CIRCUIT DIAGRAM 2N~ E3481/E3481R WIRING DIAGRAM 3~...
  • Page 11 E3481/E3481R WIRE DIAGRAM...
  • Page 12 E3481/E3481R CIRCUIT DIAGRAM...

This manual is also suitable for:

Dominator plus e3441rDominator plus e3481Dominator plus e3481r