Basic Operation - Luxor TUTV2500 User Manual

Basic operation

Turning on and off
Changing channels
Teletext and interactive services
if your chosen channel has digital text features press the TeXT or coloured buttons to access
them. To return to normal viewing press TeXT again. Some services offer interactive features,
details of these and how to use them will appear on screen as they occur.
12
To turn on your DTR, press the
indicator light will go green.
To turn off your DTR, press the
light will turn red again. The message 'oAD' will indicate the box
is updating and that you should wait before pressing any further
buttons.
The DTR must be on or left in standby if you want to keep the
programme guide and Top Up TV programmes updated.
To change channel press the Ch+ or Ch- buttons. This will
move through the channel list one at a time. You can also set
a favourite channel list which will allow you to skip between
the channels you watch most often. how to set up this list is
explained on page 16. Note that the channel numbers are not
continuous. These are set by the broadcaster and cannot be
changed.
if you wish to search for your channel by name, use Quickfind.
u
press the oK button.
v
Use the arrow buttons to move the highlighter around the
programme names, until the channel you wish to watch is
highlighted. (only some channels are shown inside the
box, keep moving left or right to find the rest.) if favourite
channels are set, only those chosen will appear in the box.
w
press the oK button again to change the channel.
if you know the channel number you are looking for, enter this
using the number buttons. with digital TV there can be up to 3
digits in the number.
A banner with information about the programme currently
showing will appear briefly each time the channel changes. for
more details on getting programme information, see page 13.
button. The red standby
button. The standby indicator